Jump to content

another noob

Rowbear23

By Rowbear23
in Introduce Yourself Here

 Share

Recommended Posts

Rowbear23 Member

Rowbear23

Posted
Posted

Hi, I'm Robert. I live in Johnson City, TN and am not nearly a year into tinkering with watches. I bought a lot of over 200 mechanicals last July and have had a lot of cheaper movements to experiment with. I've been steadily buying more/better tools and just got my first staking set, bench, and L&R cleaner two weeks ago. I do wonder what has to happen before I am able to post in the repair forums. I have so many dumb questions to ask ?

 

IMG_5058.jpg

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Thank you Robert for your introduction and welcome to this friendly forum.

Robert, no question is dumb. On here we all like to help out. If you are not sure about shell we say a part or movement you need help with photos help a lot, it also gives others on here who are not that advanced as others to take part. 

Link to comment
Share on other sites
watchweasol Distinguished Member

watchweasol

Posted
Posted

Hello and welcome to the forum Robert. Judging by your armoury of tools this is no whim and you are here for the long stay. any questions will always get an answer, wish you all the best on the voyage into Horology.  Dont forget the books and Marks Videos and course's  enjoy.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • oldhippy
      Movement inserted from crytal side

      By oldhippy · Posted

      Before putting it back in the case I would fit the hands and use a pin vice on the stem to make sure the hands were in line. 
    • Jon
      Introducing myself

      By Jon · Posted

      Hi there  
    • Jon
      Movement inserted from crytal side

      By Jon · Posted

      Put the movement in a movement holder and it will be supported as you push down on the setting lever post to release the winding stem. Make sure the post is over the shoulder of the movement holder so what you are pressing down on is supported. As a general rule, hold the movement and not the movement holder. Replace the hands when the movement isn't in the case and support the centre jewel (if it has one) on a hard surface or staking block when replacing the hands to stop the jewel accidentally moving or even coming out. A dedicated movement holder with a central jewel support is even better, but pricey
    • JohnR725
      Main spring

      By JohnR725 · Posted

      It might help us if we knew which watch like model number.
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Hi, guys I have a bit of a predicament and hopefully, somebody can advise. I'm working on a Roamer MST 521 where the movement is extracted from the crystal side. I'm now at the final hurdle where I need to replace the movement back into its case but I'm not sure of the correct procedure. I still need to fit the hands but that's where the problem lies. If I insert the winding stem to test the hands for correct alignment I will need to turn the movement over to release the stem again it's the spring-loaded type and needs a small bit of force to push down but with the hands fitted, I don't think I can do this on a cushion without causing some damage to the hands and that's the last thing I want to do, this watch has already been a love-hate relationship and I'm so close to boxing this one off which I'm counting as my first major project.  The other option is to case the movement then fit the hands and hope everything is okay. I've already broken the original winding stem but managed to find a replacement, the last one in stock, so I'm a bit reluctant to keep removing it. Any suggestions would be appreciated. 
×
×
  • Create New...