Jump to content
  • 0

L & R #111 Ultrasonic Cleaning Solution and Silver


Question

Hello

Not really a watch question, however I thought I would it it a try. I have a couple of Silver Beer Mugs that are tarnished and all I have to clean them with is the L & R Ultrasonic Watch Cleaning Solution (ammoniated) and a ultrasonic machine. I also have the L & R Ultrasonic Watch Cleaning Solution and an Ultrasonic machine. Does anyone know if I can use these two products on the silver beer mugs or should I get another type of cleaner> Also should I be diluting the cleaning and rinse solutions? 

Thanks in advance for any help that can be provided.

Michael

Link to post
Share on other sites

3 answers to this question

Recommended Posts

  • 0

All you need is a tub of goddard's silver polish and a cloth. When polished wash with hot soapy water and dry.  

Link to post
Share on other sites
  • 0

I think your solution should work on the mugs - simply a case of waiting until they become bright. If you plan to drink from them then I’d certainly use detergent afterwards!

  • Like 1
Link to post
Share on other sites


  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Hi Gary  Nothing specific on the 1406U but have the 1407 1405, and according to Ranfft its close in design to the Zenith 135 so I popped that one on too.       There are manual watch winders out there they are like a small spring loaded clamp  I have attached images. They come in different sizes to fit the crowns.      cheers 1176_Eterna 1407.pdf Eterna 1405.pdf 2656_Zenith 135.pdf
    • Hi, yes it is a 718 movement. Never come across this problem before. The watch is keeping great time but every day the date change changes an hour forward so one day will change at say 1am, the next 2am and so forth
    • Sounds like an interesting symtom, is it falling exactly 1 hour behind with every daychange or what? A guess with that day date 70's model it would house an 718 movement.
    • Just so I understand clearly first it's an hour off then you reposition the hands it's one half hour off? As it's the calendar parts shall have to take the hands and dial off and see what's going on. Then it's hard to go beyond this because which movement is this? But we could guess if the hands are actually tracking it's probably not a Canon opinion the problem perhaps. That takes us back to something to do with the the calendar parts which are under the dial unfortunately. Then we can't even look for a tech sheet if one even exists without a movement identification. But more likely have the watch hasn't been serviced in a long time that needs to be done.
    • Just in case your part doesn't work the last link has one. Big part of the problem might be for people identify the watch perhaps. It actually goes by several different names. Then as far as I can tell from looking at bestfit online and the Site below there's only one set bridge. I snipped some images out of the physical bestfit book at one time there was what was called the fingerprint system used to setting parts to identify your watch. In this case will use it to see what your parts are supposed to look like. Unfortunately the snipped images won't print out the correct size but at least you can look at the shape and see if it matches.. The second link has a listing of all the parts. The third listing  which watches have your set bridge and its and the last listing in case you want to buy one it looks like they have it in stock. http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&&2uswk&Langendorf_1305 http://cgi.julesborel.com/cgi-bin/matcgi2?ref=LNG_1305 http://cgi.julesborel.com/cgi-bin/matcgi2?ref=X`_DZLU http://www.julesborel.com/s.nl/it.A/id.57704/.f  
×
×
  • Create New...