Jump to content

Upcoming Eta Part Restrictions


Recommended Posts

First of all, sorry I don't have the specifics on hand right now, I recently got a newsletter through from the British guild of watch and clockmakers at work confirming and updating a nagging fear about ETA part restrictions, they announced a date, which if no one else can provide I'll make sure to post it tomorrow when I can read it again.

As far as I can tell, they plan on no longer providing any spare parts to anyone other than Swatch and the various Swiss watchmaking houses that they manage. 

God I see so many problems across the industry with this, I just don't know how any of this will work out.

Anyone have any insights into the situation?

Edited by Ishima
Link to comment
Share on other sites

Well it's not really that simply, no one wants to use Chinese movements/parts, and it leaves the issue of current watches that are fitted with ETA movements, which makes the majority of the upper market of watches, what are we to do about them, just do straight movement exchanges, or keep a bench of movements for salvage, either way, it will make horology more difficult and more expensive.  

Edited by Ishima
Link to comment
Share on other sites

I know independents here that have been posting signs in their shops about this since the courts found against the SWATCH group. A number of them have been stockpiling mountains of eta parts and have been supplementing with Chinese parts. One I know has a big sign that says all replacement parts will be Chinese origin unless the customer specifically requests Swiss.

Link to comment
Share on other sites

There's a good article on how eta painted themselves into a corner. Can't find it now but will keep looking.

By virtue of being the biggest supplier of movements and parts, they could not refuse to supply their products to all comers!

Anil

Link to comment
Share on other sites

There's been quite a long discussion about this here in the past. As I've said before, there will be three probable effects (IMO) on the watch world:

 

1. Repairers will stock s/h parts and the desirability of s/h ETA movements on eBay and other sources will rise

2. Chinese and Japanese watches will kick off in an even bigger way

3. More brand makers will do deals with independent Swiss manufacturers outside the Swatch group.

 

Greed will eventually take its toll...

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello everybody, sorry for the late reply. Thank you all so much for your help and your tips. I got lucky and found a replacement wheel bridge for cheap which actually ended up being in decent condition. I decided not to do anything about the mainspring barrel pivot since I didn't have the right tools and the barrel didn't have much endshake anyhow. I am happy to report that the watch now runs great, I have regulated it to about +-10/s day which is fine by my standards. The timegrapher result looks decent as well, although beat error is around 0.6ms which could be better I suppose. Amplitude reaches over 230 quite consistently which I'm happy with also. My lighter fluid has also been replaced by balance spring cleaning solution and now the springs don't stick to themselves anymore - who would have thought. I'm super happy with this watch, it might not be worth a whole lot but it's awesome that I could restore it and it makes me wear it with pride. To me it's a genuinely good lucking watch, it'll be my daily driver for a while. Thanks again to everybody for their input! I couldn't have done the repair without your help.   Here are some images for those interested, the bracelet isn't original but I don't really mind:    
    • Balance-hairspring system is oscillator with big Q-factor. When all in the movement is OK, the rate (frequency) is verry close to the own resonant frequency of the balance-hairspring. But in some cases, the movement (with foult) will force the resonator to work on pritty different frequency, sometimes faster, and sometimes slower. When this happens, the amplitude is always weak. So, the first thing to ask is what is the amplitude. If it is more than 180 and the hairspring doesn't touch itself and anything else, then for sure it is 'short'. If the amplitude is weak, then the first thing to do is to understand why and rectify the problem. At this time no point to check timekeeping. But, if one doubts that the hairspring is not correct, then He needs to calcullate the rate of the movement, then to 'vibrate' the balance-hairspring out of the movement and to measure the free oscillations frequency (period) with timer in order to ensure that they comply with the rate. If we have pictures, then it will be easier to tell something about that wheel.
    • So much work has gone into this! Thanks again @Jon. I will go back and check my adjustments from last weekend. A few questions for you, if you don't mind. In the reset position, I can understand the problem if the gap between the hammer and the minute counter heart is too big (slide 77) but what is bad about both hammers being in contact with the cams (slide 76)? I read somewhere that Landeron recommended grease on the runner cam, but the minute counter heart should be dry. Is that so, and why? How many tads in a ligne?
    • Could you glue two pieces together for rigidity and separate after forming? 
×
×
  • Create New...