Jump to content

Hello there! Hallmark identification resources


Recommended Posts

I've been lurking on the forums for awhile as a reader. Like many I started with a repair book, YouTube, and a ST36 (6497). 

I am curious as to what resources you use to identify a movement based on the hallmark stamp on it, usually under the balance wheel? I have a 1984 Bradley Time Donald Duck watch. I expected it to have a BFG 134, but instead it had this. Some are made by Amida, but this isn't their stamp. Any thoughts on the manufacturer or suggestions on resources would be greatly appreciated, as all of the other help I've gotten here. 

 

Livy

20210418_184821_resized.jpg

20210418_184821.jpg

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Just so I understand clearly first it's an hour off then you reposition the hands it's one half hour off? As it's the calendar parts shall have to take the hands and dial off and see what's going on. Then it's hard to go beyond this because which movement is this? But we could guess if the hands are actually tracking it's probably not a Canon opinion the problem perhaps. That takes us back to something to do with the the calendar parts which are under the dial unfortunately. Then we can't even look for a tech sheet if one even exists without a movement identification. But more likely have the watch hasn't been serviced in a long time that needs to be done.
    • Just in case your part doesn't work the last link has one. Big part of the problem might be for people identify the watch perhaps. It actually goes by several different names. Then as far as I can tell from looking at bestfit online and the Site below there's only one set bridge. I snipped some images out of the physical bestfit book at one time there was what was called the fingerprint system used to setting parts to identify your watch. In this case will use it to see what your parts are supposed to look like. Unfortunately the snipped images won't print out the correct size but at least you can look at the shape and see if it matches.. The second link has a listing of all the parts. The third listing  which watches have your set bridge and its and the last listing in case you want to buy one it looks like they have it in stock. http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&&2uswk&Langendorf_1305 http://cgi.julesborel.com/cgi-bin/matcgi2?ref=LNG_1305 http://cgi.julesborel.com/cgi-bin/matcgi2?ref=X`_DZLU http://www.julesborel.com/s.nl/it.A/id.57704/.f  
    • Hi everyone and hope everyone is OK. bought this watch in a joblot for a tenner (£10.00) so no complaints. The watch works fine but the date changes an hour forward every 24 hours. So if I cycle through the watch and it changes at 12, the next cycle it will be 1am, the next 2am etc. I also removed the hands, cycled the watch to the precise time of date change and then replaced the hands at the 12 O'clock position but the date started to change at the half past position with the same problem as above. The hands sit fine and are snug. Any ideas on what is going on? Many thanks and kind regards. Pedro.
    • Not very much out there for this one, but here is a nice page. with a leaflet. https://eterna-fanatic.com/calibre-1406-1407/
    • hey Also any one got any work , parts sheets for the eterna 1406u cheers gary
×
×
  • Create New...