Jump to content

Vexing five-sided screw (CustomTime)


Recommended Posts

Ok, so I finally hit my limit on this one and had put it in a box out of sight and out of mind for a few weeks. It’s time to ask for help!

I purchased a CustomTime jump hour movement on eBay a while back, “for funsies,” but have been unable to open it due to a set of five-sided screws holding the case to the main plate. I have bought screwdriver sets online and tried everything I can think of to open them, but everything is too big or too small. 

Any suggestions? Does anyone know what type of screw these are and what the correct way is to open this movement?

 

Many thanks!

Dave

FBBC07A7-4B5C-4448-B96B-082D26DF7D60.jpeg

E57A2673-7A6D-49E0-94EE-F5D8FF324BE2.jpeg

5E843D0A-23DE-408D-96ED-86E33B22AC50.jpeg

Link to comment
Share on other sites

It seems a really Strange way to do things? Not that odd things don't occur every day in watch repair. Almost looks like inexpensive watches when they pressed something together it's a form of a rivet. But it may be a screw it just doesn't look right.

Find a piece of steel and just file the shape. I don't think you're going to find custom screwdrivers the right shape.

Just now, Marc said:

I think that those look more like pressed rivets than screws. 

I definitely agree with this

look at where the movement fits into the case in other words where is the edge of the case versus the edge of the movement and gently pry it's probably just stuck in the case back. There'd be no reason to have all those screws which I don't think are screws holding the watch to the case back

Link to comment
Share on other sites

Always best to identify the movement you're dealing with first. Invariably this information is stamped under the balance wheel. 

This is probably a Baumgartner so I'd expect you to see a 'G' with smaller 'BF' inside. But what's the model? Once you find this then some better info will become apparent.

Let me assume it's an 866 for now. In which case there's a helpful breakdown on this very forum at https://www.watchrepairtalk.com/topic/14174-baumgartner-bfg-866/

And those five sided screws? Nope ... as you'll see they're just the top of the legs the plate locates onto.

Link to comment
Share on other sites

2 hours ago, WatchMaker said:

Always best to identify the movement you're dealing with first. Invariably this information is stamped under the balance wheel. 

This is probably a Baumgartner so I'd expect you to see a 'G' with smaller 'BF' inside. But what's the model? Once you find this then some better info will become apparent.

Let me assume it's an 866 for now. In which case there's a helpful breakdown on this very forum at https://www.watchrepairtalk.com/topic/14174-baumgartner-bfg-866/

And those five sided screws? Nope ... as you'll see they're just the top of the legs the plate locates onto.

You’re absolutely right! BF 866!

Good call. ?

image.jpg

Link to comment
Share on other sites

17 hours ago, WatchMaker said:

Hi @DavidADav- glad that was helpful. You did the right thing by not forcing and asking first. Good luck getting your 'digital' watch going!

Thank you! It is now serviced and running like a champ. I cleaned up the case as well, and now just need to outfit it with a new strap. I’m thinking of throwing on a 70s style cuff, since it’s a unique piece. 

86588DED-AB55-4F80-9369-A6C2A377A63E.jpeg

61571F0C-541B-4D77-B7E4-68C16449D981.jpeg

  • Like 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • This is a type of tool that may be suitable to remove the bezel - though note that I'm pretty sure the watch should be face down - not face up, as in some of the photos of these tools on amazon & ebay! If you try one one of those, put the movement screws back in first to avoid accidents. https://www.amazon.co.uk/Removal-Professional-Remover-Watchmaker-Diameter/dp/B09XCH4QVN?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=A296NCMMFVXSDN&th=1  
    • Hi, I’m constantly asking my wife to help me with removing the stem in order to complete casing. To expand, this is not a challenge for me when the setting lever is secured by a screw (older calibers). However when the setting lever is attached to a spring loaded setting lever axel, like on more modern calibers, I simply don’t see how to apply enough pressure on the button to get the stem out short of putting the movement face down with the dial and hands attached, which I’m loath to do in order to avoid damaging the dial/hands? what technique should I be using? thanks  
    • Many thanks for your advice (being borne in mind at present) & offer Dell. When I was given the clock the plastic anchor was loose on the arbour (it had split at the 'hole') &, after repairing this, I have been trying to determine whether the spindle (pin) should be perpendicular when the pallet is sitting on a flat surface; or whether, when installed, its L-R extremes (or alternatively its tick & tock points) should lie at equal angles from the vertical when moved with spring absent. I can get the clock to run but in every such configuration the top block has to be turned anti-clockwise (from above) by quite a bit in order to be 'in beat' & it always runs fast (despite the pendulum being set to as slow as possible). This makes me wonder if there is any particular feature of/fault in a torsion spring clock which determines which turn direction (if any) is necessary to get it 'in beat'; & whether there would be a different set of settings that would get it running nearer to time at somewhere around the mid timing/inertia position which would then allow tweaking of the fast/slow setting.
    • Now this has happened I bet China or India just to name two will start to produce none genuine parts.  I did. But idiot Boris Johnson failed miserably in his negotiations. The E U stitched up the UK like a kipper. Nigel Farage  offered his help but big head Boris declined. So this is why we are in this mess all because Johnson wasn't clever enough.  
    • Hands up all those who voted to leave the EU 😂, oopsie.  UK has just signed the Hague convention, next year that will provide cross border clout to British courts.
×
×
  • Create New...