Jump to content

cleaning a watch craft mainspring winder

arron

By arron
in Mainspring and Winding Tools

 Share

Recommended Posts

arron WRT Addict

arron

Posted
Posted

Hi Guys,

I have a new to me watch craft mainspring winder set.  There is rust and green oxidation on the disks (and probably underneath) in the barrels.  It's so bad that the push buttons will not depress to eject the disk/spring.  Any ideas on how to clean these up without making it worse?  I do have an ultrasonic.  I do not have commercial watch cleaning wash.  should i take them apart; is there a way to do that?  or do i leave them intact and soak them in something?  Thank you.

watch craft winder.jpg

Link to comment
Share on other sites
VWatchie Distinguished Member

VWatchie

Posted
Posted

I'm not an expert at cleaning but I'd soak them in a good degreaser first (for example Horosolv) and if necessary gently brush them with a glass fiber brush to see what grime comes off. Be careful with the brush though as it can make scratches. That should remove any old dried up oils. If there's rust I'd try vinegar essence but be careful to soak them for too long as vinegar essence can start to eat on the metal as well. Another option is acetone which can be very efficient. To get rid of these liquids dip them in IPA (isopropanol) and blow them dry.

  • Like 1
Link to comment
Share on other sites
VWatchie Distinguished Member

VWatchie

Posted
Posted

Oh, and I forgot to mention! Washing-up liquid can be extremely efficient. I haven often been using it and a soft dense toothbrush to get large watch parts really clean, like the main plate and the bridges. Does an outstanding job on the jewels as well. Please keep us up to date on your progress! Thanks!

Link to comment
Share on other sites
arron WRT Addict

arron

Posted
  • Author
Posted

Hello, just a quick update on my progress cleaning the mainspring winders.  I don't have any chemicals so i just dipped the heads into vinegar for 15 minutes and used a very small brush to clean the loose stuff off on the front and behind the disc.  I then dipped the heads in lighter fluid because i thought that would get rid of the water from the vinegar.  i then dried it with a hair dryer and finally lightly coated it with some clock oil i have.  it actually works nicely now.  I did one and now have 5 to go.  thanks for the ideas.  Arron.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • doober
      Rado rotor removal

      By doober · Posted

      Hi! I am in the process of restoring a rado captain cook mkII. I want to remove the rotor, but I am not sure how to and need some help. As you can hopefully see on the photo there are 2 screws. The left one has two positions, the right one looks like a regular screw. I have tried turning the right one, but it does not give even after using more force than I would expect. Anyone know the function of the left screw with the two positions and how to remove the rotor? Thanks!!
    • Randy55
      Introduction

      By Randy55 · Posted

      Welcome to the group Stirky. You can search for just about every subject in the craft here. Don't be afraid to ask if you can't find the answer that may have already been covered ( some ad nauseum LOL ). You don't have to buy Bergeon to get good quality. There are many decent mid-range tools available that will last you a lifetime. Cousins would be a good place to start . Cheers from across the pond ! Randy
    • Jon
      What are these Seitz B-Jewels?

      By Jon · Posted

      I picked up a similar amount of these jewels some years ago in a watch and clock fair. Every now and then they come in handy. This week I've got a rubbed in bombe jewel in the balance cock that is cracked and needs replacing. Very handy to have a vintage assortment of these type of jewels!
    • Stirky
      Diagram for 6497 motion works

      By Stirky · Posted

      Thanks Jon.
    • Jon
      Diagram for 6497 motion works

      By Jon · Posted

      Great diagram with the teeth and pinion count. Simple way to reduce the speed of the hour wheel by the 12:1 minute wheel. Genius and yet so simple. Always good to reinforce the principal by what you have done in your drawing. Keep doing that. I had a drawing on my wall for years showing me this which is very similar to the drawing you have done. Here's a formula to work out the beats per hour of a watch movement. The movement's BPH is dictated by the wheel teeth and pinion count and the hairspring being vibrated to the correct BPH by finding the pinning up point on the hairspring using a vibrating tool.  The reason in the formula there is X2 on the top line is because there are two pallet stones.
×
×
  • Create New...