Jump to content

DIY Oiler cup

LittleWatchShop
 Share

Recommended Posts

LittleWatchShop Distinguished Member

LittleWatchShop

Posted
Posted

I need more oiler cups--I only have one.  So I had this idea to make one.  I don't have any agate lying around.  Even if I did, I do not have the tools to create the dimple. 

Suddenly it came to me!  An acrylic watch crystal could be the cup.  All that I needed was some way to mount it.

Ahhh...the 3D printer. 

Then to add some weight, I scavenged an old watch case from the scrap pile.

Here it is on the left.

The crystal came from the scrap box--smallest ladies watch I could find.

Thoughts??

2021-03-27 09_40_40-Photos.png

  • Like 2
Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
3 hours ago, LittleWatchShop said:

An acrylic watch crystal could be the cup.

What about a glass watch crystal? I know they come in really small sizes. I have an aversion to plastic for oil cups. You never know how the oils, react with the plastic and when you stick your Oiler in there's the chance of touching the plastic and generating plastic dust in your oil.

Link to comment
Share on other sites
xyzzy WRT Addict

xyzzy

Posted
Posted

I wonder if you could find a watch case that has a removable bezel+crystal to use as the lid.  Cut down the bezel gasket, or lip if no gasket, so it's not a press fit anymore.  Then you could see the oil inside with the lid on and it would look more like a watch.

A small double dome glass crystal is just a buck or two, but I think you lose points if it's not entirely made from scrap parts.

Link to comment
Share on other sites
LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted
16 hours ago, xyzzy said:

I wonder if you could find a watch case that has a removable bezel+crystal to use as the lid.  Cut down the bezel gasket, or lip if no gasket, so it's not a press fit anymore.  Then you could see the oil inside with the lid on and it would look more like a watch.

A small double dome glass crystal is just a buck or two, but I think you lose points if it's not entirely made from scrap parts.

LOL...gonna have to work on it ?

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
38 minutes ago, LittleWatchShop said:

After all said and done...I really want this.  Why?  It is beautiful.  The cups are ruby.  Will it make a difference to an amateur like me?  No.

Worth to mention that in this case the bling factor comes to the tune of GBP 315 + 20% VAT.  But if one can live with unpolished item then the cost be just USD 30

 https://www.aliexpress.com/item/1005001405391784.html

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
1 hour ago, jdm said:

Worth to mention that in this case the bling factor comes to the tune of GBP 315 + 20% VAT.  But if one can live with unpolished item then the cost be just USD 30

Does it come in a pretty a Yellow colored box like the other one if not it's crap.

Do we know what the oil cups are made out of? In others glass very acceptable plastic not acceptable

Then there's this one it's shiny has oil cups that look like they're made out of stone but I'm sure there glass which would be fine plus there really cheap

https://www.ebay.com/itm/Oil-Cup-Stand-with-4-Containers-Tool-For-Watchmaker-Watch-Repair-Tool-US/293913922938?hash=item446ea28d7a:g:4ukAAOSwd2deFYyu

Sad the time we live in now? Not finding what I like? Originally made out of wood originally they would have had Agate Later ones were glass. Then the last ones I saw plastic covers with wooden bases and of course glass. I've attached a photograph. The reason I like these are you can physically move them close you can see what you're doing when you dip your oil are in. I do see that expensive Swiss company has colored plastic ones with possibly class inside at astronomically huge prices there seems be no in between no inexpensive single oil cups unless the plastic.

Then in case you destroy your Agate Cups they have replacements? I don't quite understand the pricing though why ceramic cost more than Agate?

https://www.cousinsuk.com/product/oil-reservoirs

 

oil cup old-fashioned type for old people.JPG

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
31 minutes ago, JohnR725 said:

I do see that expensive Swiss company has colored plastic ones with possibly class inside at astronomically huge prices there seems be no in between no inexpensive single oil cups unless the plastic.

Then in case you destroy your Agate Cups they have replacements? I don't quite understand the pricing though why ceramic cost more than Agate?

I have stopped trying to make sense of Swiss tools prices, and for the most part stopped buying them altogether. I just want the work done and if the Indian or Chinese item does it, that's what I'm buying.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • joelcarvajal
      Gamblin Gamsol for cleaning?

      By joelcarvajal · Posted

      Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • nevenbekriev
      Main spring

      By nevenbekriev · Posted

      Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      I did not. I thought about it, but I had cleaned it in my ultrasonic, and the tech sheet shows lubricating it in place already assembled, so I figured discretion was the better part of valor. Although since I have to depth the jewels anyway, maybe I pull the pinion off to rule it out 100% as part of the problem. Do you know if there's a safe way to do it? I don't want to use a puller because it would push down on the plane of the wheel, and that seems like a Bad Idea. I thought about using a roller table remover, but I don't think I have a hole stake pointy enough to push it down.
×
×
  • Create New...