Jump to content

Movement Identification


Recommended Posts

yes, measure the old spring (length, width, height, thickness, barrel size) If you can't get the exact size, you can substitute a different spring if the critical dimensions are the same or compatible.

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&Ebosa_65

Mainspring: 1.50 x 9.5 x 0.11 x 290mm

 

Either of these would be suitable:

1.50 x .11 x 280 x 8.5 Non-Automatic GR4148

1.50 x .11 x 300 x 9 Non-Automatic GR4149

Lots of posts available here on replacing springs

 

 

Link to comment
Share on other sites



×
×
  • Create New...