Jump to content

Movement Identification


Recommended Posts

yes, measure the old spring (length, width, height, thickness, barrel size) If you can't get the exact size, you can substitute a different spring if the critical dimensions are the same or compatible.

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&Ebosa_65

Mainspring: 1.50 x 9.5 x 0.11 x 290mm

 

Either of these would be suitable:

1.50 x .11 x 280 x 8.5 Non-Automatic GR4148

1.50 x .11 x 300 x 9 Non-Automatic GR4149

Lots of posts available here on replacing springs

 

 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement.    
    • Hi everybody,  My trade is a jeweller but I'm looking to learn more about watches. I do basic bits and pieces to watches like changing glasses, strap repairs and hand repairs but would like to upskill and learn a lot more and thought this would be the best place to do that.  
    • I have it, so until we get a lunch one day , nearly everyday is with my mum at the moment.
    • In the meantime whilst awaiting a better plan, please drop me a quick hello on my email. 
    • I looked at it like this, I've built a lot of stuff in my time, building structures and furniture,those are my creations and they will still be here way way after I'm gone. Traditional watchmakers felt the need to pass their knowledge on, ideas that they created . I assume with them as it is with me, leaving their mark on the earth, a way of being remembered. This creation of Mark's has brought thousands of people together to pass their knowledge around,  ideas that will continue to be used for lifetimes. Ideas that should continue to be procured. If for whatever reason the forum ceased to exist, not quite like Ranfft's, that didn't disappear but much less usable. Then that is sad, such a massive loss of communication between good people and a wealth of knowledge lost. There should be something in place for when that happens which could be next week, next year or in 10 years. Might not be a topical subject for a lot of folk or boardering on controversy, i did say i talk about stuff other people dont. But if you dont talk about it and something happens then you've lost it and you ain't gonna fix it .
×
×
  • Create New...