Jump to content

Recommended Posts

Just in case anyone is waiting for them to come back in stock, they are now in stock, only 87 left as I've just bought one, need it for the DLC. Jaws are 45mm and it runs on dove tails so very nice action. It looks like a direct copy of the Bergeon model of the same specs, just £200 cheaper!!!!

Also ordered the cousins mainspring let down tool, as I'm going down the clock path with the DLC so now re tooling fro watch tools to Clock specific tools now.

  • Thanks 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Thanks for the reply! I live in the US and I do have most of the stuff I need. I do have a full set of Moebius greases and oils as well. Looking at the 1900 for a while now, so I'll probably pick that up. As I said, I have a pretty good set of tools including hand levers, Presto Tools, Bergeon Screwdrivers, Dumont tweezers, loupes and other magnifiers, movement bed, Bergeon hand oilers and pots, Bergeon movement-holder, pith and peg wood, Rodico, etc, etc, etc. I have a couple of Seagull 6498s and a Seagul 2824-2 to practice destroying....er.....assembling and reassembling.
    • The intro is like something from a tv show but the instructional parts seem to be from a live training course. I'm 5 videos in and hooked, will be watching them all, great find!
    • you left out an important detail by the way? A lot of this depends upon where you live.. One of the recommendations I like to give beginners is purchasing a brand-new 6497  Chinese clone  as the Swiss originals too expensive in the clone works just fine.. Then you definitely want a timegrapher iin the beginning there very cheap now compared to what they once cost either the Chinese 1000 or the 1900 are both excellent machines. So if you have a new timing machine  and a new watch  you can llearn how to properly time things on the machine. You can look at your brand-new watch see how it functions. Then you can taken apart  and put it back together  and put it back on the timing machine and see if it still functions. Timing machines are more than just timing their diagnostic devices. There's so many questions newbies ask where if they just a timing machine it would help narrow the problem down considerably. Does not like you can hold the watch to your four head and absorb the knowledge of its problems you need  ways of doing diagnostics. Then unfortunately magnetized watches don't run well  they will have issues. aa unfortunate problem with watch repair is that is a heck of a lot of specialty tools that sooner or later would be really nice to have.. As long a basic tools you have to have.  Then when you get in the lubrication  is some of those are nice to have an they're not exactly cheap  so this isn't exactly a really cheap hobby.  
    • The latest 404 club member.  A very new looking, but slightly broken "Sekonda Classique" branded skeletonized Chinese standard movement full hunter pocket watch. Listed as not working, spares or repair, it cost 99p plus shipping. The click spring was broken and the original movement holder is missing. The donors I have, all had had various different arrangement of barrel bridge and click spring, and none matched, so I swapped the whole lot. Barrel with mainspring, barrel bridge and click. The mechanisms are very easy to work on, and in general parts from one variant of the "Standard" movement have a good chance of fitting in another, but obviously not always. It is now running nicely, and looks quite attractive, although the over all build quality is not spectacular.
    • Hi,  Just getting into watchmaking/repair as a hobby, and I have most of the tools and practice movements I'll need. My question is about timing (no pun intended) of purchase of a Timegrapher, Demagnetizer and Ultrasonic Cleaner. My plan is to practice on the movements, taking them apart, lubricating and reassembling repeatedly until I can begin to amass enough skill to begin to work on cheap and/or damaged watches, slowly building up to purchasing non-working, older, eventually vintage, watches and repairing/restoring. However, I'm just at the beginning stages, so my question is: Is it worth it to grab a timegrapher and demag now, and wait for the ultrasonic cleaner, should I wait on all of them, or should I grab them all as I will want to clean and relube my practice movements. Thanks! Imp
×
×
  • Create New...