Graver sharpener
-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
Which version of T-cut do you use, I just looked and there are hundreds.
-
By joelcarvajal · Posted
Hi! I am eyeing an L&R master but it doesn't come with the propeller attachment and basket. Where can I get my hands to one of this? -
Another 404 club prospective member is on its way. This one is an automobile style long stem "pocket watch", with radium lume dial and hands. The seller claims that it ticks, so that's always a bonus. It is missing the seconds hand, and the crystal is somewhat yellowed. There were a couple of enamel dials in the lot too.
-
I've only had to do this twice but this way both times with success. I got the cousins pins and filed one side. I did break a few pins before one looked correct…
-
By Neverenoughwatches · Posted
I thought I'd seen the brass taper pins on cousins site. The pin is fitted to the outside of the hairspring, when I've done them in the past i have filed a flat side onto the pin to fit against the hairspring. Doing that makes it possible to square up the hairspring before pushing the pin fully home
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.