Jump to content

Recommended Posts

Hi there, I don't see why not, anyway just at the bottom as you post you will see add files. Just tap that and look for the video on your device, tap that and it will upload. Hope this helps 

Graziano 

  • Like 1
  • Thanks 1
Link to post
Share on other sites
4 hours ago, Graziano said:

stiamo aspettando, we are waiting for your video 

Hi Graziano I seem to be experiencing technical difficulties with it I will as soon as I fix it. 

Link to post
Share on other sites

On behalf of anyone else with a third world internet connection, if you post it to YouTube, then share a link, those of us without bandwidth can view it as well (it's also really easy to post videos that way).

  • Like 1
  • Thanks 1
Link to post
Share on other sites
On 2/19/2021 at 10:09 AM, spectre6000 said:

On behalf of anyone else with a third world internet connection, if you post it to YouTube, then share a link, those of us without bandwidth can view it as well (it's also really easy to post videos that way).

Done and done. It's in the video section.

Link to post
Share on other sites

I thought this was the video section. Link? (I found all three parts via your youtube account and the part 3 video, but not on here).

Edited by spectre6000
Link to post
Share on other sites

I'm watching the first part now. I have a different version of that same roll top desk. You show your laptop on one of the pullout top extensions. I TOTALLY forgot about those! I've been expanding onto the table behind me lately (it's the dining room table, and absolutely not a sustainable solution), where it would have been so much better to just pull those things out. I love those desks! Like you, I'm still moving into mine because there are so many places for things to go.

  • Like 1
Link to post
Share on other sites
On 2/22/2021 at 9:44 AM, spectre6000 said:

I thought this was the video section. Link? (I found all three parts via your youtube account and the part 3 video, but not on here).

 HI Weasol I think, or thought I posted the link? Is it gone?

Link to post
Share on other sites
On 2/22/2021 at 11:08 AM, spectre6000 said:

I'm watching the first part now. I have a different version of that same roll top desk. You show your laptop on one of the pullout top extensions. I TOTALLY forgot about those! I've been expanding onto the table behind me lately (it's the dining room table, and absolutely not a sustainable solution), where it would have been so much better to just pull those things out. I love those desks! Like you, I'm still moving into mine because there are so many places for things to go.

Lol glad to be of help for a change! Yeah I love my desk that's for sure. 

Link to post
Share on other sites


  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • I think Earl Gray is an acquired taste. I hated it when I first tried it. Now I find it tolerable. Eventually I might find it ok. 😂 But what do you think of tea used in confections and other foods. Like matcha cakes 😖, Earl Gray cheesecake 🤪, duck smoked with tea leaves 🤔, etc...?
    • Hello Not really a watch question, however I thought I would it it a try. I have a couple of Silver Beer Mugs that are tarnished and all I have to clean them with is the L & R Ultrasonic Watch Cleaning Solution (ammoniated) and a ultrasonic machine. I also have the L & R Ultrasonic Watch Cleaning Solution and an Ultrasonic machine. Does anyone know if I can use these two products on the silver beer mugs or should I get another type of cleaner> Also should I be diluting the cleaning and rinse solutions?  Thanks in advance for any help that can be provided. Michael
    • Hi JDM - Thanks for the detailed reply. The Bezel only looks like a rotating time ring, but it's just a "faux" divers watch, only rated to 50m. I think the Seiko "Solar Power" version actually had a rotating ring and Tritium on the hands and numbers and was rated to 200m or something. But, the bezel is fixed. Also, there are no "indent" or any indication that you could use a Snap Back knife to open the bezel. If this is not indeed a screw off bezel (using a screw type base wrench), then a 4 blade bezel tool is likely the only thing that will remove it. Then I'll need to figure out how the stem is removed so I can remove the whole movement to get to the Cap which I assume is underneath. Other owners on some other watch forums have reported the same experience I had with my Lorus/ Seiko 851 model, the Capacitor fails after only 8 to 10 years and nothing like the "promised" 80 years (Life Time Warranty they refuse to obey). Quite a few owners wrote that they had the Capacitor replaced, but no details on HOW. Read my response above to "watchweasol". There's been some conflict about which capacitor to use as well since the original 2023 24T / MT920 was discontinued 30 years ago (probably the reason all these Lorus Solar watch never met the 80-year promise. Supposedly the replacement Cap is a 3023 24T now. The word in some forums is that this Maxell Cap will last 30 to 40 years. The Seiko Kenetic watches supposedly also use this same Capacitor. Have you ever worked on the Seiko Solar version of this Lorus? Thanks.    
    • @watchweasol - I  know that was the Seiko "company line" for both the Seiko and Lorus branded "Solar Power" versions, but there are an awful lot of folks that bought both and found the Capacitor died, like mine, only after 8 to 10 years and did have the Capacitor replaced with at first the original 2023 24T version and then the 3023 24T, which is apparently a much longer lived replacement. Seiko's "promise" of an 80-year life for this Capacitor was all hooey and likely the reason Seiko quickly dropped both their own branded model and the Lorus ones after just 10 years on the market. Both Seiko and Lorus (who is no longer in North America) refuse to honor the "life time" warranty. One of the reasons I now trust Casio more than Seiko for warranty promises. The movement in the Lorus is literally the exact same one that was in the 3 "Solar Power" Seiko mens models, a Seiko NA tech admitted that to me almost 30 years ago when mine stopped charging. I bought it new in 1986 or 87, and I still have the original paper manual and box and "Life Time Warranty" card (good for nuthin'). I've been a watch and clock "collector" since a teenager, prefer early American pocket watches, but who doesn't love early American MADE and Japanese and Swiss made wristwatches? So I've also collected all the tools a watch and clock tech uses, many pretty vintage too, and learned how to work to a certain degree on most any watch or clock, restoring and fixing, to my limits. I already have that (another version) Bezel removing tool, am just trying to confirm that the bezel is NOT a screw on, or absolutely IS a press-fit. Was hoping to find someone that has either worked on the Lorus version or the sort of same looking Seiko versions that also had the one-piece "tub" body. The Bezel only looks like a rotating time ring, but it's just a "faux" divers watch, only rated to 50m. I think the Seiko version actually had a rotating ring and Tritium on the hands and numbers and was rated to 200m or something. This Lorus/Seiko is an odd-ball and there is absolutely no repair info on them, so that makes me want to fix it more myself.
    • Very, very nice production.  Really outstanding walkthrough!
×
×
  • Create New...