Jump to content

New shop tour video YouTube


Recommended Posts

On 2/19/2021 at 10:09 AM, spectre6000 said:

On behalf of anyone else with a third world internet connection, if you post it to YouTube, then share a link, those of us without bandwidth can view it as well (it's also really easy to post videos that way).

Done and done. It's in the video section.

Link to comment
Share on other sites

I'm watching the first part now. I have a different version of that same roll top desk. You show your laptop on one of the pullout top extensions. I TOTALLY forgot about those! I've been expanding onto the table behind me lately (it's the dining room table, and absolutely not a sustainable solution), where it would have been so much better to just pull those things out. I love those desks! Like you, I'm still moving into mine because there are so many places for things to go.

  • Like 1
Link to comment
Share on other sites

On 2/22/2021 at 9:44 AM, spectre6000 said:

I thought this was the video section. Link? (I found all three parts via your youtube account and the part 3 video, but not on here).

 HI Weasol I think, or thought I posted the link? Is it gone?

Link to comment
Share on other sites

On 2/22/2021 at 11:08 AM, spectre6000 said:

I'm watching the first part now. I have a different version of that same roll top desk. You show your laptop on one of the pullout top extensions. I TOTALLY forgot about those! I've been expanding onto the table behind me lately (it's the dining room table, and absolutely not a sustainable solution), where it would have been so much better to just pull those things out. I love those desks! Like you, I'm still moving into mine because there are so many places for things to go.

Lol glad to be of help for a change! Yeah I love my desk that's for sure. 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That would be something! Which brings me back to;  
    • you think you're going to sleep tonight you're not, you're going to ponder the question of what makes you think those of the right parts?  
    • Does anyone knows what size case a need for a dial diameter 20.60mm?
    • Sounds like the story with my Rolex. Poor (expensive) job done by an official Rolex dealer with an "in-house" watchmaker, hence I learned watchrepair and did the servicing myself. Same story as I learned with the Omega 861, again poor job by an "in-house" watchmaker by an official Omega dealer. Once your watch goes through that back-door, you have no idea what is going to happening to it 🫣   Quite nice that they sent back the parts which had been replaced !
    • yes that's definitely not right at all. I have a picture one of my friends has a Omega coaxial there was having issues to lose asking me where he should send it. As that's a specialty watch I suggested the service center. When he got it back he sent me a picture so the replace the dial as you can see the hands the mainspring barrel and I think the price was really quite decent considering all the stuff they can replace. So I do know they do change the barrels but the other person I worked at the service center when I would ask questions and unfortunately I can't remember all the answers. I think a lot of the changing a parts is at the discretion of the watchmaker. Plus I don't know enough about the chronographs and whether that would be considered a vintage watch? I take some of the vintage watches may have been sent directly to Switzerland or another service center. Obviously with a watch like the one down below they probably have a infinite supply of parts is its relatively modern vintage stuff becomes more interesting even the watch companies don't have necessarily infinite supply of parts. But no matter what the watch shouldn't disintegrated six months that's definitely an issue.        
×
×
  • Create New...