Jump to content

1959 Timex Marlin - Can't beat that 50's chrome

JerseyMo
 Share

Recommended Posts

JerseyMo Distinguished Member

JerseyMo

Posted
Posted (edited)

The overall condition of this watch is remarkable considering it was assembled in 1959.  The metal shows no sign of corrosion of wear but the time keeping was off. So I gave it some long overdue attention. Here it is all cleaned, polished, oiled and now under test.

 

 

150207228_269948537907627_8188585964471182794_n.jpg

150150795_452958869234430_1516379269645448259_n.jpg

150197104_194873772392346_1372462277544737740_n.jpg

150673221_1091512051314438_8220457584442252676_n.jpg

Edited by JerseyMo
typo
  • Like 3
Link to comment
Share on other sites
JerseyMo Distinguished Member

JerseyMo

Posted
  • Author
Posted

Since I'm also working on one of the bedroom I decide to wear the Marlin while sanding the floors.  What better way to test the takes a licking slogan!  It did not miss a beat!  Since my home as built in 1955 I'd bet many of the workers were wearing Timex watches ?.   maybe even the guy that last sanded the floor back than.

 

150280064_755748171713549_5782098721458752075_n.jpg.3ffb0b0190f60412b0cb865fd4c4cbf4.jpg

150120139_757855291509259_3853182119504937233_n.jpg

  • Like 2
Link to comment
Share on other sites
watchweasol Distinguished Member

watchweasol

Posted
Posted

Nice floor Mo  are you going to polish it?  I remember the advert on the TV with one strapped to a prop and dunked in a tank of water and still cane out running. How many watches would stand that or even the days worth  of the sander.  I have had them in after a days golf with the balance spring tangled. 

Link to comment
Share on other sites
JerseyMo Distinguished Member

JerseyMo

Posted
  • Author
Posted

The best feature of the movement design is the oversized vconic balance. I'll keep testing this one for a few more days to see if it as any issue while wrist angel changes .  As for the floor it will get a good varnish top coat as the rest of the floors in the house.  No stain just a nice honey tone.  

Link to comment
Share on other sites
  • 2 weeks later...
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • joelcarvajal
      Gamblin Gamsol for cleaning?

      By joelcarvajal · Posted

      Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • nevenbekriev
      Main spring

      By nevenbekriev · Posted

      Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...