Jump to content

Smiths Ty


Blacklab

Recommended Posts

Just finished refurbing a tired Smiths TY believed to be from 1965:

 

Before:

post-80-0-30550800-1427146755_thumb.jpg

 

After:

post-80-0-60806800-1427146786_thumb.jpg

 

Case, dial & hands cleaned. Crystal polished. Movement serviced & broken click spring replaced (thanks to John at Obsolete Clock & Watch Parts). New strap. The timegrapher readings were a little variable, however it kept good time all weekend.

 

I am getting a bit of a thing for Smiths (the watches, not the designer-misery band from the 1980's) and have got myself a 1960 Astral to do after the next Seiko.

  • Like 9
Link to comment
Share on other sites

Thanks for the kind words, here's the innards before servicing:

post-80-0-71797000-1427149363_thumb.jpg

 

note the broken click. I normally take picks of the breakdown only for reassembly reference, I must start taking pics of the finished movement as well.

 

The only reason I think its a 1965 watch as its partially shown in an ad from that year reproduced in the book 'Smiths Watches' by Barrie Smith.

Link to comment
Share on other sites

The case was treated to 20 mins in the ultrasonic with crystal in place (glued) using washing up detergent, a bit of scraping with pegwood and a final buff with a Selvyt gold polishing cloth. The crystal was rubbed up with Polywatch.

Link to comment
Share on other sites

Thanks for posting the movement BL, it's a lot more basic than I had expected.

 

One up from the LY & 2 up from the RY as used in the Smiths Empire & Ingersol Triumph watches, made by the Anglo-Celtic Watch Co. (later called the Empire factory) in Wales - hence the 'Made in Great Britain' on the dial. The TY was produced in 1,5,7 or 21 jewel variants. The higher quality movements were produced in the Cheltenham factory & normally have 'Made in England' on the dial.

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Thanks again to you all for the compliments. I finally got myself a couple of Smiths Astrals & will post results on a new thread soon.

That I'm looking forward to BL, they're one of my favourite watches! :)

Link to comment
Share on other sites

  • 2 weeks later...

Great Job Blacklab,

 

I also love Smiths watches and Pocketwatches. I have just got in 2 rather nice Smiths Watches for my collection. Will have to put some pics up tomorrow

 

 

Best Wishes

 

Darren

Link to comment
Share on other sites

  • 2 years later...

Hello I have a couple of questions about this watch I also have this watch with the original strap and it’s in working order I’m finding it hard to find information about the watch this is the only thing I have found so far 

my first question is how much is the watch worth 

my second question is is it with getting refurbished 

Link to comment
Share on other sites

That's a great job @Blacklab , really nice end result. Can I ask what technique / kit you used to clean the dial? It looks so much better (partly due to the crystal I expect but even so). Have you had it on a timegrapher? Just wondering what sort of figure you'd expect to get from one of these. My guess would be around +/- 1m a day would be a decent result?

Link to comment
Share on other sites

Ryan - Some Smiths go for silly money unfortunately these don't tend to go for too much, best keep an eye on flebay sold listings to give you an idea of the value. As for refurbishment I think the costs would far outweigh the value, I just do them for fun. 

Pip - thanks for the kind words. The dial was in good condition, just a bit dirty. Sometimes Rodico alone can be used but if particularly bad clean with a sable brush with the dial immersed alternately in lighter fluid then and a weak washing up detergent/water solution and finally rinsed in water then thoroughly dried. I have posted in the past more extreme cleaning methods that have proved successful, but extreme caution needs to be taken & I would not recommend anything other than the most gentle of dusting with a dry sable brush if the watch is of reasonable value. The watch is still in my collection although I haven't worn it for a while, when originally serviced it ran at +/- 20s a day.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
    • Once a movement has the dial and hands put back and it is recased, would you expect the assembled watch to have the same amplitude as when the movement is in a movement holder and is without hands and dial? Thanks
    • C07641+ not sure what the "+" is for after the last digit.
×
×
  • Create New...