Jump to content

Smiths Ty


Blacklab

Recommended Posts

Just finished refurbing a tired Smiths TY believed to be from 1965:

 

Before:

post-80-0-30550800-1427146755_thumb.jpg

 

After:

post-80-0-60806800-1427146786_thumb.jpg

 

Case, dial & hands cleaned. Crystal polished. Movement serviced & broken click spring replaced (thanks to John at Obsolete Clock & Watch Parts). New strap. The timegrapher readings were a little variable, however it kept good time all weekend.

 

I am getting a bit of a thing for Smiths (the watches, not the designer-misery band from the 1980's) and have got myself a 1960 Astral to do after the next Seiko.

  • Like 9
Link to comment
Share on other sites

Thanks for the kind words, here's the innards before servicing:

post-80-0-71797000-1427149363_thumb.jpg

 

note the broken click. I normally take picks of the breakdown only for reassembly reference, I must start taking pics of the finished movement as well.

 

The only reason I think its a 1965 watch as its partially shown in an ad from that year reproduced in the book 'Smiths Watches' by Barrie Smith.

Link to comment
Share on other sites

The case was treated to 20 mins in the ultrasonic with crystal in place (glued) using washing up detergent, a bit of scraping with pegwood and a final buff with a Selvyt gold polishing cloth. The crystal was rubbed up with Polywatch.

Link to comment
Share on other sites

Thanks for posting the movement BL, it's a lot more basic than I had expected.

 

One up from the LY & 2 up from the RY as used in the Smiths Empire & Ingersol Triumph watches, made by the Anglo-Celtic Watch Co. (later called the Empire factory) in Wales - hence the 'Made in Great Britain' on the dial. The TY was produced in 1,5,7 or 21 jewel variants. The higher quality movements were produced in the Cheltenham factory & normally have 'Made in England' on the dial.

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Thanks again to you all for the compliments. I finally got myself a couple of Smiths Astrals & will post results on a new thread soon.

That I'm looking forward to BL, they're one of my favourite watches! :)

Link to comment
Share on other sites

  • 2 weeks later...

Great Job Blacklab,

 

I also love Smiths watches and Pocketwatches. I have just got in 2 rather nice Smiths Watches for my collection. Will have to put some pics up tomorrow

 

 

Best Wishes

 

Darren

Link to comment
Share on other sites

  • 2 years later...

Hello I have a couple of questions about this watch I also have this watch with the original strap and it’s in working order I’m finding it hard to find information about the watch this is the only thing I have found so far 

my first question is how much is the watch worth 

my second question is is it with getting refurbished 

Link to comment
Share on other sites

That's a great job @Blacklab , really nice end result. Can I ask what technique / kit you used to clean the dial? It looks so much better (partly due to the crystal I expect but even so). Have you had it on a timegrapher? Just wondering what sort of figure you'd expect to get from one of these. My guess would be around +/- 1m a day would be a decent result?

Link to comment
Share on other sites

Ryan - Some Smiths go for silly money unfortunately these don't tend to go for too much, best keep an eye on flebay sold listings to give you an idea of the value. As for refurbishment I think the costs would far outweigh the value, I just do them for fun. 

Pip - thanks for the kind words. The dial was in good condition, just a bit dirty. Sometimes Rodico alone can be used but if particularly bad clean with a sable brush with the dial immersed alternately in lighter fluid then and a weak washing up detergent/water solution and finally rinsed in water then thoroughly dried. I have posted in the past more extreme cleaning methods that have proved successful, but extreme caution needs to be taken & I would not recommend anything other than the most gentle of dusting with a dry sable brush if the watch is of reasonable value. The watch is still in my collection although I haven't worn it for a while, when originally serviced it ran at +/- 20s a day.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • 🤔 leaving the EU meant that UK was no longer part of the convention and have already been turned down an independent reapplication. I'm pretty sure courts have to be held in Switzerland in this case. There will be a lot more watches stashed away in draws  tbh, folk wont be able to afford to maintain them. Cheap watches will be bought and top end watches by folk with plenty of cash that can pay for service and repair. The expensive once in a lifetime gifts and everything else inbetween will be at the forgotton when they stop working. I know i was being a numpty, get used to it 😄 Anybody that knows will boycott them, but besides repairers who will know. Nope will never buy one, i made that decision as soon as i learnt about this. 
    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland. I bet the authorised service centres in the UK are pretty pleased.  It's a massive shame, though; I believe watch owners should be able to choose to have their watch serviced by whoever they trust.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
×
×
  • Create New...