Jump to content

Smiths Ty

Blacklab

By Blacklab
in Your Watch Collection

 Share

Recommended Posts

Blacklab Distinguished Member

Blacklab

Posted
Posted

Just finished refurbing a tired Smiths TY believed to be from 1965:

 

Before:

post-80-0-30550800-1427146755_thumb.jpg

 

After:

post-80-0-60806800-1427146786_thumb.jpg

 

Case, dial & hands cleaned. Crystal polished. Movement serviced & broken click spring replaced (thanks to John at Obsolete Clock & Watch Parts). New strap. The timegrapher readings were a little variable, however it kept good time all weekend.

 

I am getting a bit of a thing for Smiths (the watches, not the designer-misery band from the 1980's) and have got myself a 1960 Astral to do after the next Seiko.

  • Like 9
Link to comment
Share on other sites
Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

Thanks for the kind words, here's the innards before servicing:

post-80-0-71797000-1427149363_thumb.jpg

 

note the broken click. I normally take picks of the breakdown only for reassembly reference, I must start taking pics of the finished movement as well.

 

The only reason I think its a 1965 watch as its partially shown in an ad from that year reproduced in the book 'Smiths Watches' by Barrie Smith.

Link to comment
Share on other sites
Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

The case was treated to 20 mins in the ultrasonic with crystal in place (glued) using washing up detergent, a bit of scraping with pegwood and a final buff with a Selvyt gold polishing cloth. The crystal was rubbed up with Polywatch.

Link to comment
Share on other sites
Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

Thanks for posting the movement BL, it's a lot more basic than I had expected.

 

One up from the LY & 2 up from the RY as used in the Smiths Empire & Ingersol Triumph watches, made by the Anglo-Celtic Watch Co. (later called the Empire factory) in Wales - hence the 'Made in Great Britain' on the dial. The TY was produced in 1,5,7 or 21 jewel variants. The higher quality movements were produced in the Cheltenham factory & normally have 'Made in England' on the dial.

  • Like 1
Link to comment
Share on other sites
  • 3 weeks later...
Geo Distinguished Member

Geo

Posted
Posted

Thanks again to you all for the compliments. I finally got myself a couple of Smiths Astrals & will post results on a new thread soon.

That I'm looking forward to BL, they're one of my favourite watches! :)

Link to comment
Share on other sites
  • 2 weeks later...
daz WRT Addict

daz

Posted
Posted

Great Job Blacklab,

 

I also love Smiths watches and Pocketwatches. I have just got in 2 rather nice Smiths Watches for my collection. Will have to put some pics up tomorrow

 

 

Best Wishes

 

Darren

Link to comment
Share on other sites
  • 2 years later...
Ryan New Member

Ryan

Posted
Posted

Hello I have a couple of questions about this watch I also have this watch with the original strap and it’s in working order I’m finding it hard to find information about the watch this is the only thing I have found so far 

my first question is how much is the watch worth 

my second question is is it with getting refurbished 

Link to comment
Share on other sites
Pip WRT Addict

Pip

Posted
Posted

That's a great job @Blacklab , really nice end result. Can I ask what technique / kit you used to clean the dial? It looks so much better (partly due to the crystal I expect but even so). Have you had it on a timegrapher? Just wondering what sort of figure you'd expect to get from one of these. My guess would be around +/- 1m a day would be a decent result?

Link to comment
Share on other sites
Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

Ryan - Some Smiths go for silly money unfortunately these don't tend to go for too much, best keep an eye on flebay sold listings to give you an idea of the value. As for refurbishment I think the costs would far outweigh the value, I just do them for fun. 

Pip - thanks for the kind words. The dial was in good condition, just a bit dirty. Sometimes Rodico alone can be used but if particularly bad clean with a sable brush with the dial immersed alternately in lighter fluid then and a weak washing up detergent/water solution and finally rinsed in water then thoroughly dried. I have posted in the past more extreme cleaning methods that have proved successful, but extreme caution needs to be taken & I would not recommend anything other than the most gentle of dusting with a dry sable brush if the watch is of reasonable value. The watch is still in my collection although I haven't worn it for a while, when originally serviced it ran at +/- 20s a day.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • joelcarvajal
      Gamblin Gamsol for cleaning?

      By joelcarvajal · Posted

      Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • nevenbekriev
      Main spring

      By nevenbekriev · Posted

      Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...