Jump to content

Smiths Ty

Blacklab

By Blacklab
in Your Watch Collection

 Share

Recommended Posts

Blacklab Distinguished Member

Blacklab

Posted
Posted

Just finished refurbing a tired Smiths TY believed to be from 1965:

 

Before:

post-80-0-30550800-1427146755_thumb.jpg

 

After:

post-80-0-60806800-1427146786_thumb.jpg

 

Case, dial & hands cleaned. Crystal polished. Movement serviced & broken click spring replaced (thanks to John at Obsolete Clock & Watch Parts). New strap. The timegrapher readings were a little variable, however it kept good time all weekend.

 

I am getting a bit of a thing for Smiths (the watches, not the designer-misery band from the 1980's) and have got myself a 1960 Astral to do after the next Seiko.

  • Like 9
Link to comment
Share on other sites
Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

Thanks for the kind words, here's the innards before servicing:

post-80-0-71797000-1427149363_thumb.jpg

 

note the broken click. I normally take picks of the breakdown only for reassembly reference, I must start taking pics of the finished movement as well.

 

The only reason I think its a 1965 watch as its partially shown in an ad from that year reproduced in the book 'Smiths Watches' by Barrie Smith.

Link to comment
Share on other sites
Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

The case was treated to 20 mins in the ultrasonic with crystal in place (glued) using washing up detergent, a bit of scraping with pegwood and a final buff with a Selvyt gold polishing cloth. The crystal was rubbed up with Polywatch.

Link to comment
Share on other sites
Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

Thanks for posting the movement BL, it's a lot more basic than I had expected.

 

One up from the LY & 2 up from the RY as used in the Smiths Empire & Ingersol Triumph watches, made by the Anglo-Celtic Watch Co. (later called the Empire factory) in Wales - hence the 'Made in Great Britain' on the dial. The TY was produced in 1,5,7 or 21 jewel variants. The higher quality movements were produced in the Cheltenham factory & normally have 'Made in England' on the dial.

  • Like 1
Link to comment
Share on other sites
  • 3 weeks later...
Geo Distinguished Member

Geo

Posted
Posted

Thanks again to you all for the compliments. I finally got myself a couple of Smiths Astrals & will post results on a new thread soon.

That I'm looking forward to BL, they're one of my favourite watches! :)

Link to comment
Share on other sites
  • 2 weeks later...
daz WRT Addict

daz

Posted
Posted

Great Job Blacklab,

 

I also love Smiths watches and Pocketwatches. I have just got in 2 rather nice Smiths Watches for my collection. Will have to put some pics up tomorrow

 

 

Best Wishes

 

Darren

Link to comment
Share on other sites
  • 2 years later...
Ryan New Member

Ryan

Posted
Posted

Hello I have a couple of questions about this watch I also have this watch with the original strap and it’s in working order I’m finding it hard to find information about the watch this is the only thing I have found so far 

my first question is how much is the watch worth 

my second question is is it with getting refurbished 

Link to comment
Share on other sites
Pip WRT Addict

Pip

Posted
Posted

That's a great job @Blacklab , really nice end result. Can I ask what technique / kit you used to clean the dial? It looks so much better (partly due to the crystal I expect but even so). Have you had it on a timegrapher? Just wondering what sort of figure you'd expect to get from one of these. My guess would be around +/- 1m a day would be a decent result?

Link to comment
Share on other sites
Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

Ryan - Some Smiths go for silly money unfortunately these don't tend to go for too much, best keep an eye on flebay sold listings to give you an idea of the value. As for refurbishment I think the costs would far outweigh the value, I just do them for fun. 

Pip - thanks for the kind words. The dial was in good condition, just a bit dirty. Sometimes Rodico alone can be used but if particularly bad clean with a sable brush with the dial immersed alternately in lighter fluid then and a weak washing up detergent/water solution and finally rinsed in water then thoroughly dried. I have posted in the past more extreme cleaning methods that have proved successful, but extreme caution needs to be taken & I would not recommend anything other than the most gentle of dusting with a dry sable brush if the watch is of reasonable value. The watch is still in my collection although I haven't worn it for a while, when originally serviced it ran at +/- 20s a day.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
×
×
  • Create New...