-
Similar Content
-
By mcoulton
Hello
Can anyone provide me with links to watch dial re-sellers or sellers other than Ebay or Etsy? I'm interested in sourcing a unique watch dial as a starting point for a watch build. The dial could be wooden or have a painting on it etc. Something unique and interesting. From there I will go onto to find a case, movement, hands and strap; but its the dial that will be the source of inspiration. I have found some interesting dials, however the seller only wants to sell in quantities of 100 or more.
Thanks you in advance for any help that can be provided.
Michael
-
-
Recently Browsing
No registered users viewing this page.
-
Topics
-
-
Posts
-
By watchweasol · Posted
Hello and welcome to the forum Monty Dont know how far you have traveled in the world of Horology but the attached may be of use to you. TZIllustratedGlossary.pdf -
By nickelsilver · Posted
Just spring them open. If you go too far, hold them in your non dominant hand "backwards", holding tightly right where the 'Bergon' printing is, then push the tail end back and forth. This will bring the tips closer in its relaxed state. -
By nickelsilver · Posted
The case springs for hunter cases can be quite stout, they are often held in by a pin once they are tensioned (sometimes a screw). To tension them in place you need these pliers, whether to remove one or install one. I am more familiar with the bottom two from the illustration, these press on the spring and the opposing side of the case. The one in the pic holds from the outside while tensioning the spring. -
-
I think I found the bugger but still don’t know how to use it. Says it is a Case Spring Plier. Second from the top of the picture.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.