Jump to content

Recommended Posts

IMG_20201128_165359.thumb.jpg.76c149c5ece5bddc632471959d6d24d2.jpgIMG_20201128_165346.thumb.jpg.9a6a78b5edb6d5a76586c060164af67a.jpgDear all

I wonder if you can help me identifying my 8 mm lathe. Headstock, bed and support are completely unbranded. The person I got it from says it's a Lorch. However I could not find any pictures of a Lorch without oilers like mine. The tailstocks of my 6 mm Lorch are compatible in that they have the exact same centre height. Could it be Wolf & Jahn ?  Have you ever seen a model like this?
I thank you very much for your help and remain with all the best from Hamburg

Alex

Link to comment
Share on other sites

1 hour ago, AlexanderToerzs said:

IMG_20201128_165359.thumb.jpg.76c149c5ece5bddc632471959d6d24d2.jpgIMG_20201128_165346.thumb.jpg.9a6a78b5edb6d5a76586c060164af67a.jpgDear all

I wonder if you can help me identifying my 8 mm lathe. Headstock, bed and support are completely unbranded. The person I got it from says it's a Lorch. However I could not find any pictures of a Lorch without oilers like mine. The tailstocks of my 6 mm Lorch are compatible in that they have the exact same centre height. Could it be Wolf & Jahn ?  Have you ever seen a model like this?
I thank you very much for your help and remain with all the best from Hamburg

Alex

I think I have one of these??

image.jpg

image.jpg

Link to comment
Share on other sites

To the best of my knowledge Boley & Leinen never made a Geneva pattern lathe, they always used either the WW pattern or a reduced form of that they called "Reform", which is what JD's appears to be.

 

Have a dig around Tony's site, probably has dozens of watch lathe makes listed with an immense amount of information on them.

http://www.lathes.co.uk

Link to comment
Share on other sites

Thanks Nickelsilver. Tony has a 6mm Wolf Jahn which is apart from it's size identical to my model. I have now found reliably the following thread dimensions: Lorch 6,985 x 0,625 and Wolf Jahn 6,85 x 40G. I measured the thread of the chuck and it read 6,85 mm almost bang on. So it's a Wolf & Jahn. Compatible chucks with the same thread and pitch are Leinen (but not Boley & Leinen) and Bergeon. 

Thanks and greetings from Hamburg, Alex

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...