Jump to content

Long time away

Vich

By Vich
in Relax Zone: Chat About Anything Here

 Share

Recommended Posts

Vich Distinguished Member

Vich

Posted
Posted

Just a brief Hello,

I have not been active on the forum for some time but without going into detail there have been a few health setbacks and deterioration of sight has not helped. Ironically I have just recently been given an excellent watch makers lathe and am enjoying my practise with it.  I am still tinkering but it takes much longer than it used to.

I have an ancestors company verge fusee pocket watch in pieces at the moment, it is signed but as with these items probably not much of his own work gone into it.  I will be working on it from time to time but parts may be an issue. Also an Omega bumper is in pieces, cleaned and ready to work on.  So not quite written off yet.

If anyone is interested, John Robey has published a PDF on Academia about Sam Harlow, one of my Ancestors from the line of Ashbourne Clock and Watchmakers,a Long Case Clockmaker.  Its quite interesting, obviously to me, but others may be interested, I may have a word with him and get permission to put it on the Forum for folks.

Anyway, hello to everyone for now and I will be popping back again from time to time.

Cheers,

Vic

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • tomh207
      Gamblin Gamsol for cleaning?

      By tomh207 · Posted

      I don’t know anything about this product, however assuming you have it if you put a drop on a mirror or piece of glass lying flat on a table and leave it to evaporate if it leaves any sort of residue it is not really suitable for watch part cleaning.   Tom
    • Michael1962
      I'm going to be setting up a decent little workshop here at home.

      By Michael1962 · Posted

      Well I put the spa on Gumtree (selling service) to try and sell it as it only needs a recirc pump to get it going. However, it weighs circa 250kg, so there's 4 fairly strong guys, and I would have to remove the sliding door in the room completely to be able to get it out, as well as clearing out a multitude of potted plants and the Alfresco outdoor setting to be able to get it out. Then move nearly everything in the back of the garage to be able to push it through to the front of the house. I would also need to hire furniture skates to be able to shift it around as carrying it is out of the question. Then someone would need a trailer to get it to their place as you won't get it on the back of a ute. So, the only answer is, out with the reciprocating saw and cut it all up into manageable pieces. Crying shame as it is in really good nick. I was only asking $1,500 and only got two bites, but it would only take something to go wrong with removing the sliding door etc that everything I make on the sale could go out the door on repairs etc. It would have been nice to be able to turn it into tools etc, but que sera sera. I don't know about the rest of the world, but there just seems to be very little interest from people wanting to buy things secondhand.  
    • mikepilk
      Commando special

      By mikepilk · Posted

      I would like to see the movement. The watch is the movement. Anyone can print a name on a dial and sell it as "the maker".
    • VWatchie
      What are these Seitz B-Jewels?

      By VWatchie · Posted

      Thanks for your answers! There seems to be a contradiction between these two answers, so perhaps I need to clarify. The flat and convex jewels look identical on the side facing away from the pivot shoulder. That is, there is an oil reservoir. I don't know if that changes anything but I thought it was safest to clarify since I didn't include a picture of the jewels from the opposite side.
    • JohnR725
      Incabloc Lyre Spring & Low Earth Orbit

      By JohnR725 · Posted

      unfortunately paying attention to details bumps up the cost. Which is why they shortchange on manufacturing steps if they can.
×
×
  • Create New...