Jump to content

New shop.

markr
 Share

Recommended Posts

markr Super WRT Addict

markr

Posted
Posted

I'm Moving to a different building at the same complex and will have a nice room next to my office just for watch repair.  Their is a concrete floor now.  I plan to caulk between the floor and walls and paint the floor.  Question is do I paint it white or another color for easy finding of parts?  Any other advice before moving in?

Link to comment
Share on other sites
Poljot Super WRT Addict

Poljot

Posted
Posted
1 hour ago, markr said:

Question is do I paint it white or another color for easy finding of parts?  Any other advice before moving in?

Get into a habit of using Rodico or two sets of tweezers, or a pair of tweezers and a peg-wood stick to hold the part in place while removing or installing it. Sometimes you can use a small piece of plastic wrap on top of the movement during disassembly of certain components. It's clear plastic - you can see things and the parts are not going to fly across the room.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
On 11/27/2020 at 9:56 PM, markr said:

 Their is a concrete floor now.  I plan to caulk between the floor and walls and paint the floor. 

I would not like concrete floor in a rough mechanical shop, and it would drive me crazy for a watchmaking or any other precision shop. I do not know what kind of climate you have but just an average winter would make expensive and difficult to geet a comfortable temperature to work in. Anything else from the cheapest wood flooring to linoleoum or tiles would be better.

Link to comment
Share on other sites
Tudor Distinguished Member

Tudor

Posted
Posted

I think that a "brown" color was suggested in the book I'm reading.

So, perhaps cork? It's somewhat softer; low bounce for parts, and provides that contrast for shiny parts. But you can still roll an office chair on it.

Or maybe have the floor re-poured like a shower floor, with a big magnet at the low spot?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Waggy
      Without Our Forum

      By Waggy · Posted

      I've remained silent on this thread, and at the risk of upsetting everyone, the thing that worries me the most the the apparent absence of Mark. The moderators do a great job and the members also pitch in, and the site seems to run itself, but it is a concern for the future of this forum when the owner is absent for all intents and purposes. Like many of the comments above I would hate to log in one day and things be closed down as I rely on this site for ideas and knowledge and also cheer me up. maybe the Moderators could reach out to him, assuming he does not read this thread, and express our concerns and let us know the plans going forward? some kind of WRT ark
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      That was the exact reason for me starting this thread watchie. Still we haven't worked out how the regulars are going to hook up if it goes tits up. I honestly think something should be arranged to stay in contact, we all help each other so much. 
    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      Yeah ive watched that a few times before,  i couldnt find my old school dividers to scribe it up 😅 Yep thats the guy i bought a roll from . Thanks Nicklesilver that answers that perfectly and more or less what i thought an experiment over time would prove . The jumper arm is quite thick along its length, i left it that way intentionally, i thought the original was probably very thin, i didnt see that it was already missing. Setting isn't particularly stiff as such just positive, i still need to take it out and polish where it mates with the stem release. 
    • VWatchie
      Without Our Forum

      By VWatchie · Posted

      Yes, "Sold out" is difficult to understand. There doesn't seem to be a lot going on. It's been nine months since any new video was published on the Watch Repair Channel. The Level 4 course on watchfix.com has been in progress for what feels like forever (several years!?). Maybe Mark's enterprises aren't doing well or perhaps already so profitable there's nothing much to motivate him for more material. Or, perhaps these days he's more into crochet. The real reason is probably something entirely different but it would be nice/interesting to know. I don't mean to sound gloomy or pessimistic, but I wouldn't be surprised to be met by an HTTP 404. Every day feels like a gift. Speaking of watchfix.com I've been postponing the "Level 5: Servicing Chronograph Watches" course for a very, very long time. Anyway, I just enrolled on it so it's going to be very interesting to see the videos. I must say, IMO there's nothing really that can compete with Mark's courses when it comes to presentation and video quality. It's simply world-class and makes me associate with some really expensive BBC productions.
    • nickelsilver
      Setting lever spring

      By nickelsilver · Posted

      Steel has some funny properties, or at least counterintuitive. The modulus of elasticity is effectively (not exactly, but close enough) the same for steel that is annealed and hardened. What changes is the point of plastic deformation* . If the movement of your spring doesn't pass that, it should work fine. It looks a little thick, I would thin it a bit maybe from the main body out about halfway, maybe 10-20% thinner (not in thickness, along its form). But if it works it works!   *So- if you have two bars of the same steel, one annealed, one at 600 Vickers (general hardness watch arbors might be), clamp them to a table so the same length is hanging out, and put a weight on the ends, they will bend the same amount. But if you continue to add weight, then remove it, at a point the annealed bar won't return to its original straightness. That's the point of plastic deformation. But up to that point, as springs, they are the same. However- their wear characteristics will be very very different. And getting the hardened bar past its point of plastic deformation takes a lot more effort.
×
×
  • Create New...