Jump to content

My time as a watchmaker


Recommended Posts

The other day I was thinking about when I was a watchmaker and I was having problems with my posture and my neck. I was diagnosed with very sever spondylitis and was told the wear in the bones in my neck come close to someone in there 70’s I was only in my early 30’s at the time. My neck would lock and I was unable to move my head. The bones would rub each other because in some of my vertebral cartilage was none existent this also caused bad headaches and tightening of the muscles in my neck, it felt like my head was about to fall off. I had a Therapeutic counselor come around and have a look at my work shop. My work bench had to be a certain height so did all the other benches. One of the best recommendations for my posture and to help my neck was a ergonomic kneeling chair. It worked wonders for me and improved my posture and neck they are extremely comfortable. 

Here is the chair 

s-l1600.jpg

  • Like 4
Link to comment
Share on other sites

51 minutes ago, oldhippy said:

The other day I was thinking about when I was a watchmaker and I was having problems with my posture and my neck. I was diagnosed with very sever spondylitis and was told the wear in the bones in my neck come close to someone in there 70’s I was only in my early 30’s at the time. My neck would lock and I was unable to move my head. The bones would rub each other because in some of my vertebral cartilage was none existent this also caused bad headaches and tightening of the muscles in my neck, it felt like my head was about to fall off. I had a Therapeutic counselor come around and have a look at my work shop. My work bench had to be a certain height so did all the other benches. One of the best recommendations for my posture and to help my neck was a ergonomic kneeling chair. It worked wonders for me and improved my posture and neck they are extremely comfortable. 

Here is the chair 

s-l1600.jpg

Good story and very informative. This is why I purchased the mini bench

Link to comment
Share on other sites

As a dentist for 35 years, I fully understand what you are saying. I have spondylosis in my neck, midback and lower back. And the compression of the spinal nerves lead to all sorts of systemic symptoms. 

I've spent a lot on various furniture and support aids with little results to show. But my chiropractor said symptoms do improve with age, which I find is true to a certain extent.

But the most ironic thing I found out from speaking to a Swedish company specializing in ergonomic office furniture is .... too much ergonomics is a bad thing. Having everything at arms reach at work leads to weakening of your core muscles.

So my advice to young people nowadays is WATCH YOUR BACK!

Link to comment
Share on other sites

I think another factor that led to my back problems was deteriorating eyesight when I turned 40. To see better, I leaned in closer and every degree we lean in front of our centre of gravity, the more strain it puts on our spine.

Like now, after an 8 hr day at work, my back is killing me. If I feel the skin along my spine, some spots are literally hotter than others. On bad days, I have to put an ice pack on it.

Link to comment
Share on other sites

The human skeleton is poorly designed. In the end I had to give it all up I ended up having a breakdown, that wrecked my marriage  After a slow recovery which took about 10 years I learned I T and went into teaching which was a laugh.  I'm retired now and once again enjoying life.

Link to comment
Share on other sites

I don't rest my head on pillow but back of my shoulder and let my head rest about an inch lower than head when sleeping, this has eleminated head aches, pain in my neck and shoulder area.

Surgeons refused to operate on my neck specially, for the high risk. 

At early stages, I quitted accupuncture treatment as I believe the pain is a warning system and an absolute need for our safety.

Spinal problems, can also cause anxiety, depression and a host of psychosematic like issues, as our brain is uncertain what physical accident might happen next, specially in cases the brain remembers what caused the damage in the first place.

To those who have spinal/neck issue, I say there defenitely exist a posture just right for you, pain helps you find it. 

Best wishes

 

Link to comment
Share on other sites

I've seen kneeling chairs before.  I have more problems with my lower back than any other part.  If adjusted accordingly, does anyone know if this sort of chair would be effective in addressing that kind of ailment?  I am considering giving one of those chairs a chance.

 

Link to comment
Share on other sites

  • 3 weeks later...

I had one of those ergonomic chairs when I worked for Alcoa in WA. Brilliant.

I should try and see if I can score one where I work now. I have one of this adjustable desks and spend a lot of time standing up at work.

 

Edited by Michael1962
Link to comment
Share on other sites

  • 1 month later...

As a hobbyist, I don't suffer for these particular ergonomic afflictions, but I do sit at a desk a lot, and that comes with its own hazards.

My local yoga specializes in back care and in particular for scoliosis and herniation.

I go to two back care specific classes per week, 90 minutes per class. They not only give you time to un-do the effects of bad posture during the class, but help raise awareness as to what your are doing wrong and what "right" feels like.

I would highly suggest this if it is available in your area. I found two weeks of these classes much more effective than months at the chiropractor.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Welcome to the group Stirky. You can search for just about every subject in the craft here. Don't be afraid to ask if you can't find the answer that may have already been covered ( some ad nauseum LOL ). You don't have to buy Bergeon to get good quality. There are many decent mid-range tools available that will last you a lifetime. Cousins would be a good place to start . Cheers from across the pond ! Randy
    • I picked up a similar amount of these jewels some years ago in a watch and clock fair. Every now and then they come in handy. This week I've got a rubbed in bombe jewel in the balance cock that is cracked and needs replacing. Very handy to have a vintage assortment of these type of jewels!
    • Great diagram with the teeth and pinion count. Simple way to reduce the speed of the hour wheel by the 12:1 minute wheel. Genius and yet so simple. Always good to reinforce the principal by what you have done in your drawing. Keep doing that. I had a drawing on my wall for years showing me this which is very similar to the drawing you have done. Here's a formula to work out the beats per hour of a watch movement. The movement's BPH is dictated by the wheel teeth and pinion count and the hairspring being vibrated to the correct BPH by finding the pinning up point on the hairspring using a vibrating tool.  The reason in the formula there is X2 on the top line is because there are two pallet stones.
    • So I just wanted to say "thank you" again.  The angle is the key bit it seems and yes, it did basically just fall, or float, back into position when I got it lined up just right. I had meant to add that now that I see how it goes in, I totally see how it came out in the first place, and that whomever cloned the original movement didn't pay much attention to the fine details around the setting or how it interfaces with the balance cock or the "rings" on the regulator and/or stud carrier arms.
×
×
  • Create New...