Wyler dynawind eta 2375

[thecodedawg]

I picked up a Wyler Dynawind with an ETA caliber 2375.  It has a broken setting lever spring for which I have sourced a replacement.  However, it is also missing a split stem male and female and crown.  Where can I get the right stem?  I am a newbie.  Do I have to make one?  
 

 

[WatchMaker]

Unless you fancy a challenge it's worth looking at the websites of the usual parts suppliers first. The Resources page you'll find a link to at the head of this forum is a good place to start.

I can see for instance Cousins has both male and female stem parts listed. I'm sure other suppliers closer to your neck of the woods might be able to oblige too.

Also a good tip to a newbie is not to focus exclusively on the movement model you're specifically dealing but be aware of models in the same family. In your case http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&&2uswk&ETA_2375 will list other members of the family. Often you'll find that parts are listed against the first member of the family ... so that's the ETA 2370 in your case. A quick ebay search on 'eta 2370 stem' brings up for instance https://www.ebay.com/itm/ETA-2370-watch-movement-part-404-female-split-stem/132105059577

With these breadcrumbs I'll let you take over...! 

[watchweasol]

Hi Watchmakers is correct,  If you are in the states places to look are Jules Borel,  Esslingers,  Otto Frei and I am sure there will be others. If you are just starting out the attached publication is worth a read.

1033305402_TZIllustratedGlossary(1).pdf