Jump to content

Watch Repair Lessons Level 2 Tools/Equipment

Dumasdrew

By Dumasdrew
in Tools & Equipment

 Share

Recommended Posts

Dumasdrew Member

Dumasdrew

Posted
Posted

Hello all! This question is for those of you that have taken the Watch Repair Lessons Level 2 class, or possibly even Mark himself if he happens to read this.

I'm wondering if someone can give me a list of tools/supplies that I will need in order to complete this class before I sign up for it (other than the Unitas 6498/Seagull 3620 listed on the website). With the way the world is right now, it could take quite some time for parts and supplies to arrive after I order them, so I'd like to get everything I need before I enrol in the class. I have passed level one, so I have the barebones such as screwdrivers, movement holders, case openers, etc. But I imagine there are more specific things needed for the next level.

Thanks in advance!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      This set lever seems to working ok unhardened Nickelsilver, might it deform if i leave it that way ?
    • nickelsilver
      Setting lever spring

      By nickelsilver · Posted

      I found this from a while back CS100 seems fine, but at around 500 Vickers it's not quite as hard as "blue" steel, but still harder than annealed. I'd try to find annealed (the post above has a U.K. supplier of small quantities).
    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      As an experiment i was thinking of not hardening it to see how it fairs. Now that i have a complete template i could knock up another in half the time if this loses its elasticity. I might play about with a few pieces today to test their bending and spring properties. This was cs 100 the supplier quoted in annealed state, it was nice to work with files so I'm taking it thats its state. What you are looking seems like it would need annealing to work it. This is why i went for this stuff that cuts out that process, it was so easy to work.
    • dnhb
      Is this a 'hack' ?

      By dnhb · Posted

      Showing state of hairspring on receipt, backplate & 'dished' wheel.  Thanks, Nev. Amplitude v. weak - balance wheel turns over arc of only ~20deg. Don't know how to calculate movement rate or safely vibrate balance spring! Meantime I have reduced the 'dishing' & clock no longer runs for more than a few minutes except face down which supports my theory that it was 'dished' as a hack to avoid doing a proper repair.
    • mikepilk
      Setting lever spring

      By mikepilk · Posted

      I would harden and temper (to a light blue). It's so easy to do and only takes a couple of minutes. A search on ebay UK for "spring steel strip cs" finds plenty available in small quantites and thicknesses from 0.1mm up.  But the question is ( @nickelsilver) which "CS" number is best for watch parts ?  Also, from one of the ads : "CARBON SPRING STEEL. SIZE IS METRIC 15.00mm X 0.10mm X 304 MM  CS100 FINISH BRIGHT . HARDENED AND TEMPERD TO 480-530VPN" I've no idea about 480-530VPN. Does that mean it needs annealing before working?       Have you seen this video, he shows how to determine where the indents go ?  
×
×
  • Create New...