Jump to content

Jacot tool and pivot file burnisher question


Recommended Posts

Looking at the pic just send it back. I purchased a poising tool a couple of years back from fleebay and when it arrived there was distinct crack on one of its cheeks, it other word this tool was U/S.  To be fair to the seller I sent it back & received a full refund. If purchased from eBay there should be a returns policy on the sellers page.

Link to comment
Share on other sites

  • 5 months later...
  • 2 months later...

Hello all, my name is Anthony. I have been collecting timepeices for the better part of 10 years now, and have been studying watchmaking for 3 years now. I have just been the lucky buyer of a Steiner Jacot tool with adjustabke height. I currently own a Steiner Jacot tool, but find I can not find any info on how to properly use this new one with adjustable height. I have been following Marks videos and find them great, Mark thanks for taking all the time to do this, and also all the others who help and contribute. I think this forum is great. Please if anyone has any info that would great. The first of many posts. I can not post pic, because I have not received the too yetl, can I post the website link here to the auction site I won it on?. Many thanks Anthony

  • Like 1
Link to comment
Share on other sites

Welcome to the forum Tony. That's a nice looking tool that you have purchased, and what a good price. I too have a Jacot tool, but again it is not adjustable in height so would not wish to comment on setting it up correctly. Hopefully someone on the forum be able to help you.

I was wondering if it was designed to take a different head (To convert into a set of turns) and that is why there is an adjustment facility to ensure correct alignment. As a matter of interest, how much height adjustment does it have?

Link to comment
Share on other sites

Thanks for the info, and the welcoming, as soon as I receive the tool I will post more pictures, I currently have a regular Steiner jacot tool, but some lanterns where broken when I got it, this was better than buying new pieces for the one I already had. I just thought I would post this to get a head start on learning to use it. From what I have read and it maybe wrong, the attachment is called a"slidding puppet" , and it maybe used for a second pinion? 

Link to comment
Share on other sites

  • 3 months later...

Hi all, purchased this off the bay, looked in reasonable condition (took a punt on it)

 

Assuming there are no chips in the holes, is there anything else i should be looking for or is missing?

 

Thanks in advance

 

279c07.jpg
3ab375.jpg
40ebf2.jpg
1611a7.jpg
Edited by jnash
Link to comment
Share on other sites

  • 9 months later...

All:

I recently grew tired of trying to use the old bow system of powering my Jacot lathe and decided to make my own fixture for powering the tool. I've seen many people do this before, so I thought I'd give it a try. Here's all that it took to complete.

Parts list:

  • Small wooden cutting board
  • Variable speed low RPM electric motor (39 rpm at 6 volts and increases at higher voltage setting)
  • Motor bracket
  • 4 - Rubber feet
  • 1/4" thick aluminum plate (sloted for adjustment to accomodate other tools)
  • 4 - 3/8" diameter bolts, nuts, and washers
  • 4 - 1/8" diameter bolts, nuts, and washers
  • 1" diameter plastic pulley (tension fit to motor shaft)
  • 2mm O-ring 
  • DC  power supply

Here's a video of the thing in use.

Thanks,

Tom

 

pic2.jpg

pic1.jpg

pic3.jpg

pic4.jpg

pic5.jpg

  • Like 4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That would be something! Which brings me back to;  
    • you think you're going to sleep tonight you're not, you're going to ponder the question of what makes you think those of the right parts?  
    • Does anyone knows what size case a need for a dial diameter 20.60mm?
    • Sounds like the story with my Rolex. Poor (expensive) job done by an official Rolex dealer with an "in-house" watchmaker, hence I learned watchrepair and did the servicing myself. Same story as I learned with the Omega 861, again poor job by an "in-house" watchmaker by an official Omega dealer. Once your watch goes through that back-door, you have no idea what is going to happening to it 🫣   Quite nice that they sent back the parts which had been replaced !
    • yes that's definitely not right at all. I have a picture one of my friends has a Omega coaxial there was having issues to lose asking me where he should send it. As that's a specialty watch I suggested the service center. When he got it back he sent me a picture so the replace the dial as you can see the hands the mainspring barrel and I think the price was really quite decent considering all the stuff they can replace. So I do know they do change the barrels but the other person I worked at the service center when I would ask questions and unfortunately I can't remember all the answers. I think a lot of the changing a parts is at the discretion of the watchmaker. Plus I don't know enough about the chronographs and whether that would be considered a vintage watch? I take some of the vintage watches may have been sent directly to Switzerland or another service center. Obviously with a watch like the one down below they probably have a infinite supply of parts is its relatively modern vintage stuff becomes more interesting even the watch companies don't have necessarily infinite supply of parts. But no matter what the watch shouldn't disintegrated six months that's definitely an issue.        
×
×
  • Create New...