Jump to content

Jacot tool and pivot file burnisher question


Recommended Posts

Looking at the pic just send it back. I purchased a poising tool a couple of years back from fleebay and when it arrived there was distinct crack on one of its cheeks, it other word this tool was U/S.  To be fair to the seller I sent it back & received a full refund. If purchased from eBay there should be a returns policy on the sellers page.

Link to comment
Share on other sites

  • 5 months later...
  • 2 months later...

Hello all, my name is Anthony. I have been collecting timepeices for the better part of 10 years now, and have been studying watchmaking for 3 years now. I have just been the lucky buyer of a Steiner Jacot tool with adjustabke height. I currently own a Steiner Jacot tool, but find I can not find any info on how to properly use this new one with adjustable height. I have been following Marks videos and find them great, Mark thanks for taking all the time to do this, and also all the others who help and contribute. I think this forum is great. Please if anyone has any info that would great. The first of many posts. I can not post pic, because I have not received the too yetl, can I post the website link here to the auction site I won it on?. Many thanks Anthony

  • Like 1
Link to comment
Share on other sites

Welcome to the forum Tony. That's a nice looking tool that you have purchased, and what a good price. I too have a Jacot tool, but again it is not adjustable in height so would not wish to comment on setting it up correctly. Hopefully someone on the forum be able to help you.

I was wondering if it was designed to take a different head (To convert into a set of turns) and that is why there is an adjustment facility to ensure correct alignment. As a matter of interest, how much height adjustment does it have?

Link to comment
Share on other sites

Thanks for the info, and the welcoming, as soon as I receive the tool I will post more pictures, I currently have a regular Steiner jacot tool, but some lanterns where broken when I got it, this was better than buying new pieces for the one I already had. I just thought I would post this to get a head start on learning to use it. From what I have read and it maybe wrong, the attachment is called a"slidding puppet" , and it maybe used for a second pinion? 

Link to comment
Share on other sites

  • 3 months later...

Hi all, purchased this off the bay, looked in reasonable condition (took a punt on it)

 

Assuming there are no chips in the holes, is there anything else i should be looking for or is missing?

 

Thanks in advance

 

279c07.jpg
3ab375.jpg
40ebf2.jpg
1611a7.jpg
Edited by jnash
Link to comment
Share on other sites

  • 9 months later...

All:

I recently grew tired of trying to use the old bow system of powering my Jacot lathe and decided to make my own fixture for powering the tool. I've seen many people do this before, so I thought I'd give it a try. Here's all that it took to complete.

Parts list:

  • Small wooden cutting board
  • Variable speed low RPM electric motor (39 rpm at 6 volts and increases at higher voltage setting)
  • Motor bracket
  • 4 - Rubber feet
  • 1/4" thick aluminum plate (sloted for adjustment to accomodate other tools)
  • 4 - 3/8" diameter bolts, nuts, and washers
  • 4 - 1/8" diameter bolts, nuts, and washers
  • 1" diameter plastic pulley (tension fit to motor shaft)
  • 2mm O-ring 
  • DC  power supply

Here's a video of the thing in use.

Thanks,

Tom

 

pic2.jpg

pic1.jpg

pic3.jpg

pic4.jpg

pic5.jpg

  • Like 4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
    • Once a movement has the dial and hands put back and it is recased, would you expect the assembled watch to have the same amplitude as when the movement is in a movement holder and is without hands and dial? Thanks
    • C07641+ not sure what the "+" is for after the last digit.
×
×
  • Create New...