Jump to content

double fusee bracket clock

rajeshvyas

By rajeshvyas
in All Things Clocks

 Share

Recommended Posts

oldhippy Distinguished Member

oldhippy

Posted
Posted

Oh dear looks like it’s been in a fire. There is a James Corrie of London listed from 1832 to 1857 in Watchmakers & Clockmakers of the World Vol 2 by Brian Loomas. This is a late bracket clock as it doesn’t have any engraving on the back plate. So it’s about 1857. The poor thing is going to need a lot of restoring.

Link to comment
Share on other sites
rajeshvyas Member

rajeshvyas

Posted
  • Author
Posted

hi, many thanks for your valuable reply. i have recently restored it not fully but up to some extent keeping old ware and scratches all around! to my surprise the clock even so old started ticking after cleaning and re-fitting. it shows very precise workmanship by Corrie! the hammer strikes with full strength even after ages....pix attached. thanks/rajesh

after restoration (1).jpg

after restoration (3).jpg

  • Thanks 1
Link to comment
Share on other sites
  • 2 weeks later...
rajeshvyas Member

rajeshvyas

Posted
  • Author
Posted

hi, again i am back with one more query. i have one single fusee large size ONLY movement with counter weight engaged on the minute wheel. now, to start with i will have to first make minute hand and then fix the dial size, so is it possible to judge the length minute hand?  

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

I would say that movement is from some advertising clock going by the weight. I wouldn’t be surprised if the minute hand is about 18 to 24 inches. Its going to be a trial and error regarding the hand. Something that fits is all you need to start with.

Link to comment
Share on other sites
rajeshvyas Member

rajeshvyas

Posted
  • Author
Posted

good if it can hold 18-24" at present i am testing with 0.8mm thick 12" long hand. if the result is good i will further increase the length to 20-24"  

one more thing i would like to know while testing does it make any difference if i test it without pendulum? as per my knowledge pendulum regulates the speed and has nothing to do with the hand/counter weight-correct? 

Link to comment
Share on other sites
rodabod Distinguished Member

rodabod

Posted
Posted

The greatest load will probably be somewhere around quarter-to-nine. You could just test it at the first few clicks of the fusee to check it can still run at the weakest portion of the wind (even though the fusee compensates for this to some extent). Driving the pendulum does consume energy (think about during recoil) so will need to be fitted. 

Link to comment
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HectorLooi
      Without Our Forum

      By HectorLooi · Posted

      Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • GuyMontag
      What tools does ebay have to offer this week.

      By GuyMontag · Posted

      I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
×
×
  • Create New...