Jump to content

It’s about time we had another clock competition


oldhippy

Recommended Posts

6 hours ago, rodabod said:

On D, it’s the open mainsprings which are the first clue, plus the shoddy plates!

How old is that fourth one anyway?  Were American clockmakers still using mortise/tenon & wedges to hold the movement together in place of screws well after we started calling ourselves "USA" in the very late 1700s?  

Link to comment
Share on other sites

With out looking at that movement in any detail I would say around 1890's. With these clocks it can be quite easy to date if the label is still with the clock. It is a typical movement of its country, crude in every way, nothing fancy but robust, behind those massif springs is a force you do not want anything to go wrong and end up with a busted hand. 

Still waiting for a winner. One is causing a bit of a problem, someone is very close. 

Link to comment
Share on other sites

Clock A painted case is typical of one European country  and is reminiscent of  a Mora clock also from that country so I would say Sweden

Clock B is a triple pad top verge fusee and is English

Clock C is a German Lenzkirch bracket clock in walnut veneer case, these turn up quite regular a small movement in a large  case around 1900, popular at auction and in good condition fetch £600-£800  with all Ting Tangs its the case that makes the difference in price.

Clock D  The model T-Ford of the clock world produced for ease and low cost of production for the masses typical American

  • Like 1
Link to comment
Share on other sites

7 hours ago, oldhippy said:

Correct. He always wins. He has a vast knowledge of clocks.  

Which would amount to one side of a postage stamp compared to yourself ?

I do own a horological mystery clock, that no one has ever been able to attribute country or maker to they turn up now and again its large 8 bell bracket clock with St Michael chimes and is spring driven with a unusual off set barrel arrangement and underslung bell nest. It has many attributes that make people either say French or German, but many think they come from Slovakia I shall make a seperate post of it and see if anyone knows.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Before putting it back in the case I would fit the hands and use a pin vice on the stem to make sure the hands were in line. 
    • Put the movement in a movement holder and it will be supported as you push down on the setting lever post to release the winding stem. Make sure the post is over the shoulder of the movement holder so what you are pressing down on is supported. As a general rule, hold the movement and not the movement holder. Replace the hands when the movement isn't in the case and support the centre jewel (if it has one) on a hard surface or staking block when replacing the hands to stop the jewel accidentally moving or even coming out. A dedicated movement holder with a central jewel support is even better, but pricey
    • It might help us if we knew which watch like model number.
    • Hi, guys I have a bit of a predicament and hopefully, somebody can advise. I'm working on a Roamer MST 521 where the movement is extracted from the crystal side. I'm now at the final hurdle where I need to replace the movement back into its case but I'm not sure of the correct procedure. I still need to fit the hands but that's where the problem lies. If I insert the winding stem to test the hands for correct alignment I will need to turn the movement over to release the stem again it's the spring-loaded type and needs a small bit of force to push down but with the hands fitted, I don't think I can do this on a cushion without causing some damage to the hands and that's the last thing I want to do, this watch has already been a love-hate relationship and I'm so close to boxing this one off which I'm counting as my first major project.  The other option is to case the movement then fit the hands and hope everything is okay. I've already broken the original winding stem but managed to find a replacement, the last one in stock, so I'm a bit reluctant to keep removing it. Any suggestions would be appreciated. 
×
×
  • Create New...