Jump to content

It’s about time we had another clock competition


oldhippy

Recommended Posts

6 hours ago, rodabod said:

On D, it’s the open mainsprings which are the first clue, plus the shoddy plates!

How old is that fourth one anyway?  Were American clockmakers still using mortise/tenon & wedges to hold the movement together in place of screws well after we started calling ourselves "USA" in the very late 1700s?  

Link to comment
Share on other sites

With out looking at that movement in any detail I would say around 1890's. With these clocks it can be quite easy to date if the label is still with the clock. It is a typical movement of its country, crude in every way, nothing fancy but robust, behind those massif springs is a force you do not want anything to go wrong and end up with a busted hand. 

Still waiting for a winner. One is causing a bit of a problem, someone is very close. 

Link to comment
Share on other sites

Clock A painted case is typical of one European country  and is reminiscent of  a Mora clock also from that country so I would say Sweden

Clock B is a triple pad top verge fusee and is English

Clock C is a German Lenzkirch bracket clock in walnut veneer case, these turn up quite regular a small movement in a large  case around 1900, popular at auction and in good condition fetch £600-£800  with all Ting Tangs its the case that makes the difference in price.

Clock D  The model T-Ford of the clock world produced for ease and low cost of production for the masses typical American

  • Like 1
Link to comment
Share on other sites

7 hours ago, oldhippy said:

Correct. He always wins. He has a vast knowledge of clocks.  

Which would amount to one side of a postage stamp compared to yourself ?

I do own a horological mystery clock, that no one has ever been able to attribute country or maker to they turn up now and again its large 8 bell bracket clock with St Michael chimes and is spring driven with a unusual off set barrel arrangement and underslung bell nest. It has many attributes that make people either say French or German, but many think they come from Slovakia I shall make a seperate post of it and see if anyone knows.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Happy to have helped, great way to start the day with a win! 🥳
    • Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
×
×
  • Create New...