Jump to content

It’s about time we had another clock competition


oldhippy

Recommended Posts

6 hours ago, rodabod said:

On D, it’s the open mainsprings which are the first clue, plus the shoddy plates!

How old is that fourth one anyway?  Were American clockmakers still using mortise/tenon & wedges to hold the movement together in place of screws well after we started calling ourselves "USA" in the very late 1700s?  

Link to comment
Share on other sites

With out looking at that movement in any detail I would say around 1890's. With these clocks it can be quite easy to date if the label is still with the clock. It is a typical movement of its country, crude in every way, nothing fancy but robust, behind those massif springs is a force you do not want anything to go wrong and end up with a busted hand. 

Still waiting for a winner. One is causing a bit of a problem, someone is very close. 

Link to comment
Share on other sites

Clock A painted case is typical of one European country  and is reminiscent of  a Mora clock also from that country so I would say Sweden

Clock B is a triple pad top verge fusee and is English

Clock C is a German Lenzkirch bracket clock in walnut veneer case, these turn up quite regular a small movement in a large  case around 1900, popular at auction and in good condition fetch £600-£800  with all Ting Tangs its the case that makes the difference in price.

Clock D  The model T-Ford of the clock world produced for ease and low cost of production for the masses typical American

  • Like 1
Link to comment
Share on other sites

7 hours ago, oldhippy said:

Correct. He always wins. He has a vast knowledge of clocks.  

Which would amount to one side of a postage stamp compared to yourself ?

I do own a horological mystery clock, that no one has ever been able to attribute country or maker to they turn up now and again its large 8 bell bracket clock with St Michael chimes and is spring driven with a unusual off set barrel arrangement and underslung bell nest. It has many attributes that make people either say French or German, but many think they come from Slovakia I shall make a seperate post of it and see if anyone knows.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi guys, the question is what is a forum, a place for discussion and passing on information, idle chat and a bit of fun and I for one are the richer for it. When in Hospital last year with the Covid being force fed oxygen and feeling total sh1t and close to the pearly gates a daily look on the forum to see what was going down helped to keep me focused on the job in hand took my mind off the problem for a short while but it was a lifeline for sure. We chat to friends for that is what they become around the world read their posts help where we can post information where we can.  I like @Neverenoughwatches some times think of members past and wonder if they are still at the watches or given up, some drop in for advise and drop out again never to be heard of again. The forum reminds me of Yorkshire hospitality, The door is always open and the kettle on the stove. Long may it continue.   My two bobs worth.
    • Thanks all.   Movement is a Helvetia 800C. Don't know any history e.g. if the broken mainspring is original. Watch was bought recently as non-working. Really interesting piece that Jon, thanks. I'd only been thinking of length relating to power reserve. I don't have a mainspring winder (yet) so I'd like to avoid winding the spring into the barrel by hand. The old spring measures at 1.60 x .11 x ~290. Sorry, can't be exact on the length. The piece I still have is 275, but the second piece escaped during measurement. Best measurement I had for it was ~13. The micrometer does zero accurately so I'm pretty confident of the .11 Also, I'm getting the barrel ID at 9.5 on a vernier. I'm now wondering about going with a .11 spring? Given all of the above, maybe 1.60 x .11 x 300 x 9? Any thoughts? Cheers.
    • Funny that you should bring this up. I was thinking about it just the other day. What happens if something happens to @Mark? The social bit is fantastic and I would miss it dearly, but I worry even more about the content. Together we have created a gold mine of information which would be more or less irreplaceable if the site should disappear. People (often with a lot of knowledge) come and go. I sometimes wonder what happened to them and miss them. We have no idea unless we have some private contact information. When I was new here I saw a lot of posts by @Lawson. He had a true fire in his heart for horology and was asking for an apprenticeship in his signature. I found that very inspiring and often wondered what happened. Is the fire still burning? Did he get an apprenticeship?
    • Welcome to the forum, enjoy.
    • I dont like to give up things that i enjoy Tom.  So my next question is how are we going to prepare for that inevitability and what are we going to do about it. Its not just about funding it but I did pick up on something that Mark said once. It doesnt run on fresh air , what if it becomes a burden or an unnecessary cost or for any other reason that i wont get into. We all know life can change in an instant, my life has been so up and down for about 8 years and was only just beginning to level itself out. 
×
×
  • Create New...