Jump to content

Ultrasonic cleaner


Willow

Recommended Posts

Most clock cleaning fluids are ammonia based, they can be used with or without a ultrasonic tank, I use a 10 litre plastic storage box to soak parts when cleaning, how long I leave them soaking depends on how dirty and tarnished they are but it's also important not to leave them too long as they will become pickled or dulled looking. Horolene is very good but expensive, Priory polishes make a brass cleaner which is the same formula as Horolene ( comparing safety data sheets)but about half the price it is used diluted 1 part cleaner to 7 parts water.

Obviously being ammonia based they are quite smelly.

Link to comment
Share on other sites

Ultrasonics are a bit of a no-no for earlier work, especially where brass has been work-hardened as it creates microscopic fractures which deteriorate when treated to ultrasonics. By “early”, I’m taking Victorian and earlier, and mainly plates. 

However, they are still very useful for some parts - I used an Elma ultrasonic for cleaning some fusee cones and steel chains earlier. I used Horolene which is very powerful for the brass cones, and L&R watch cleaner for the chains as it is oil-based an so would not subject them to water where possible. 

Link to comment
Share on other sites

1 hour ago, rodabod said:

For light duty, the Chinese made stainless steel models are ok. But they do not last for ever. Make sure you use a basket which suspends the mass from the base as this interferes with how the bath resonates. 

I re-used a soup plastic container - after eating the soup :)- to hold my cleaning liquid and the parts I wanted to clean and I placed it in the middle of the tank surrounded by water, it was not suspended at all, but standing flat on the bottom of the tank. Would it be the reason why my cheap Chinese ultrasonic cleaner gave up so early and died? 

Link to comment
Share on other sites

20 minutes ago, luiazazrambo said:

I re-used a soup plastic container - after eating the soup :)- to hold my cleaning liquid and the parts I wanted to clean and I placed it in the middle of the tank surrounded by water, it was not suspended at all, but standing flat on the bottom of the tank. Would it be the reason why my cheap Chinese ultrasonic cleaner gave up so early and died? 

Well, I have destroyed around four of them so far. I was told by a friend who uses them for automotive work that you must use a basket to preserve the machine, so I reckon this probably shortens the life of them if you don’t use one. 
 

The only time I won’t use a basket is when my inner container of soap and parts floats inside the main bath of water. This stops the pressure of your container from interfering with the case resonating. 

  • Like 1
Link to comment
Share on other sites

I did notice some small deposits of brass at the bottom of my horosolv tank recently which did make me wonder where it was coming from. I think it’s probably best not to leave it too long if you do you use it, and especially on the plates. 

Link to comment
Share on other sites

I have recently ruined the coating of the plates of my PUW60 movement which is not that old that mentioned above.

PUW60

Unfortunately I don't have pictures about the plates themselves, but you can see that yellow section under the balance wheel where the coating ended up at the bottom of my cleaning container, i did not understand first what are those shiny bits.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
    • Isn't that the same guy who told Zelenskyy to escalate the war with Russia/Putin when they already had a peace deal? 2 years later and we have half a million young Ukranian boys dead. He doesn't seem very clever...
    • Thanks guys.  quick question. For automatic movement, particularly this one. can I power down the main spring by pushing this rachet down?  i've gotten pretty used to SW210 and powering down a manual movement. But so far i've only been waiting for the auto movement to run out of juice before opening the case.     
    • @Murks the problem you have mate is most watch cases out there to buy are for Seiko NH3X, ETA 2824 and maybe Myota 8XXX movements, oh also the big ETA 6978/9 movements which the dials start around 28.5mm. You might find one on a Google search but I suspect your main chance will be buying cheap quartz ladies watches and hopefully find one of the right size and condition that is acceptable. 😞   Tom
    • The anchor pin should be perpendicular when the anchor is sat on a flat surface and if you post a close up picture of the backplate I will be able to tell you the correct torsion spring , running fast or slow is usually wrong Torsion spring. Here is a video from my YouTube channel showing how I set the beat  
×
×
  • Create New...