Jump to content

Hello

Wobblycogs

By Wobblycogs
in Introduce Yourself Here

 Share

Recommended Posts

Wobblycogs Member

Wobblycogs

Posted
Posted

Hello everyone, please let me introduce myself. 
 

I am Nick. I have had a keen interest in clocks and watches since I was a small child as one of my uncles used to repair both at his home and I would stand watching him for hours. I didn’t do anymore than that and grew to the ripe old age of 15 yrs and my first job was a toolmaker ... that was it my interest started to burn again. However my path took a different direction and at the age of 52 yrs I found myself pensioned out of my job with a non-stop shaking right hand and a diagnosis of Complicated PTSD, I am lucky enough to still be receiving treatment for it. 
As my head slowly started to see my world again the first thing to burn away at me was my desire foe old clocks. Cutting a very long story short, I was given a very old Longcase Clock to try and fix. I invested in some on-line learning, which was and still is excellent and I now go to my workshop when I can - about half of the week. I call it my home therapy as bizarrely my arm shakes so much that I can hardly write and yet I am able to work mostly shake free in my workshop. 
 

Sorry I rambled on a while!

  • Like 4
Link to comment
Share on other sites
Wobblycogs Member

Wobblycogs

Posted
  • Author
Posted

Thank you for the warm welcome. 
just to clarify I have moved on and also work on mantle clocks, 400 day (Anniversary Clocks) and Cuckoo clocks. Although I’ll have a go at pretty much anything - the older the better. I try and stick to original methods for restoration etc. 

  • Like 1
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted
1 hour ago, Wobblycogs said:

Thank you for the warm welcome. 
just to clarify I have moved on and also work on mantle clocks, 400 day (Anniversary Clocks) and Cuckoo clocks. Although I’ll have a go at pretty much anything - the older the better. I try and stick to original methods for restoration etc. 

What would your idea of original methods be?    

  • Like 1
Link to comment
Share on other sites
KarlvonKoln Distinguished Member

KarlvonKoln

Posted
Posted

Welcome!  You have found the right place, I would say.  I have a soft spot for old pocket watches myself, but I often need to work on clocks and wristwatches, mine and other's.  When it comes to clocks, I defer to Old Hippy.  He knows clocks.  Enjoy our friendly forum here!

  • Like 1
Link to comment
Share on other sites
nickelsilver Distinguished Member

nickelsilver

Posted
Posted

I remember when I was learning I would go hang out in a few watch shops. More than a few times I watched old men (like 70) pick up a part- with a shaky hand, already impressive- then at the moment it mated with the watch it was like magic they'd have perfect control.

I'd like to think that this new endeavor will help you with your shaking and ptsd, and welcome to the forum!

  • Like 1
Link to comment
Share on other sites
Wobblycogs Member

Wobblycogs

Posted
  • Author
Posted

Hi. 
im new to the forum so trying to work my way around the system so I apologise if this is wrong ...

I am replying to oldhippy...  

I try and replicate traditional methods when restoring a case for example. I only use Hyde glue and will use Shellac & Beeswax etc. I hope that answers your questions?

  • Like 2
Link to comment
Share on other sites
Wobblycogs Member

Wobblycogs

Posted
  • Author
Posted
2 hours ago, nickelsilver said:

I remember when I was learning I would go hang out in a few watch shops. More than a few times I watched old men (like 70) pick up a part- with a shaky hand, already impressive- then at the moment it mated with the watch it was like magic they'd have perfect control.

I'd like to think that this new endeavor will help you with your shaking and ptsd, and welcome to the forum!

Thank you

  • Like 1
Link to comment
Share on other sites
Wobblycogs Member

Wobblycogs

Posted
  • Author
Posted
8 hours ago, KarlvonKoln said:

Welcome!  You have found the right place, I would say.  I have a soft spot for old pocket watches myself, but I often need to work on clocks and wristwatches, mine and other's.  When it comes to clocks, I defer to Old Hippy.  He knows clocks.  Enjoy our friendly forum here!

Thank you - I’m pretty sure I may use everyone’s advice at some point, but I will certainly look at oldhippyy a lot he seems to give consistent excellent advice about a wide range of topics. 

  • Like 3
Link to comment
Share on other sites
KarlvonKoln Distinguished Member

KarlvonKoln

Posted
Posted
15 hours ago, Wobblycogs said:

Thank you - I’m pretty sure I may use everyone’s advice at some point, but I will certainly look at oldhippyy a lot he seems to give consistent excellent advice about a wide range of topics. 

He does indeed.  For that matter, he knows quite a bit about timepieces in general, watches, etc.  

Link to comment
Share on other sites
Wobblycogs Member

Wobblycogs

Posted
  • Author
Posted
23 hours ago, oldhippy said:

Its always nice to know that some of the old ways are still with us. :Bravo:

Hi. 
I wonder if I may ask your advice vice on something which is probably a very simple answer but has left me scratching my head in disbelief!

I have attached a file for information which shows the Smith’s Westminster chime clock after I have cleaned & serviced etc. 
The clock was brought to me in an awful condition. It belongs to an old lady who had it off her mother. She said it hadn’t worked for years and she hadn’t even got the key, but it would be nice to hear it ticking again now she had retrieved it from her shed. 
 

The clock was understandably awful. It was as black as can be and full of years of grime dust and gunk. I very much enjoyed cleaning and serving it and was pleased to say that all of the parts are intact. Even the key was there - it was jammed between the front of the case and the movement!
 

However, I have had it running on my bench now for about 3 weeks (allowing time for setting down etc), but the clock runs and chimes excellently but will not slow down. The Bob is extended so it is hanging on by barely a thread and yet it still gains about five mins a day???
 

I would be grateful of any advice you may have?

 

Kind regards

 

Nick

d392l9JjRMSqtfmVHDnOvA.jpg

ddGaMH78Rsy8zuAcjgb6mw.jpg

WZJQq0hgTx-o_UWcBnmShg.jpg

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Looks like the wrong suspension spring. As you can see I have pointed it out. The crutch part should be about half way in that slot and not at the very bottom. Looking at the photo it is causing the s/spring to buckle, it should be straight. The clock cannot be regulated properly with the s/spring like that.   

d392l9JjRMSqtfmVHDnOvA.thumb.jpg.8ea2f333f80cc5b8dc59df101996e685.jpg

  • Like 1
Link to comment
Share on other sites
Wobblycogs Member

Wobblycogs

Posted
  • Author
Posted
17 hours ago, oldhippy said:

Looks like the wrong suspension spring. As you can see I have pointed it out. The crutch part should be about half way in that slot and not at the very bottom. Looking at the photo it is causing the s/spring to buckle, it should be straight. The clock cannot be regulated properly with the s/spring like that.   

d392l9JjRMSqtfmVHDnOvA.thumb.jpg.8ea2f333f80cc5b8dc59df101996e685.jpg

Hi oldhippy. 
 

your genius appears to have worked once again. I have made the necessary adjustments and all seems well so far, clearly I’ll need a couple of days for certainty but I’m confident and eternally grateful to you. It was one of those things where I couldn’t see the wood for the trees!
 

I would like to think I could return the favour sometime but I don’t think I’ll be in a position where you need my assistance, but it’s available if needed. Thank you. 

Link to comment
Share on other sites
  • 4 weeks later...
Wobblycogs Member

Wobblycogs

Posted
  • Author
Posted
On 9/24/2020 at 8:37 PM, oldhippy said:

Looks like the wrong suspension spring. As you can see I have pointed it out. The crutch part should be about half way in that slot and not at the very bottom. Looking at the photo it is causing the s/spring to buckle, it should be straight. The clock cannot be regulated properly with the s/spring like that.   

d392l9JjRMSqtfmVHDnOvA.thumb.jpg.8ea2f333f80cc5b8dc59df101996e685.jpg

Hi

 

I apologise for the delayed reply - I’m not used to talking on a forum. 
However - I’m certain you will have guessed by now, but your advice was spot on and the clock is now running beautifully - when I returned it to the 87 year old owner, she cried and told me that it was a present for her 21st Birthday !
Thank you oldhippy you have triumphed once more. 

Link to comment
Share on other sites
  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Malocchio
      Is this pallet fork over-locking?

      By Malocchio · Posted

      The entry jewel's not as bad but seems still too much lock. I do epilame the escape wheel and pallet jewels, then run dry for about 15 minutes, then put 9415 in exit jewel very little at a time and check with backlight how the oil's distributed.  Another question is about capped escape wheels. Should I somehow wear the epilame off the pivots before installing the wheel? I normally let the escape wheel run dry for that said 15 minutes when there's no cap jewel.
    • Malocchio
      Bezels - What am I doing wrong?

      By Malocchio · Posted

      Sometimes there's a certain place under the bezel where the case knife is supposed to be placed. In this borrowed pic there's a small crack at 3 o'clock. 
    • Waggy
      Bezels - What am I doing wrong?

      By Waggy · Posted

      Hi my fellow forum addicts, I'm writing this as I seem to have a hole in my knowledge (probably one of many!) I seem to have a horrible time removing bezels from watches. I am talking about the rotating type on sports/diving watches. I see many videos where the guy on screen barely inserts the case knife under the bezel and with no effort it pops off easily, then at the end it clicks back into place by hand with no effort. I am sure that part of this is due to skillful video editing, but I seem to wrestle with them, I have tried case knives and  even when using the tool below, I tighten it up in several positions and nothing happens. On a many occasions I have even warped the bezel in my attempts to remove it. Similarly, I have issues replacing bezels after cleaning etc. and often they have to be replaced using a press tool and inevitably are far too tight and will not rotate or loose to the point where they fall off or loose their click (perhaps due to micro warping when I tried to remove??). It is now to the point where I am actually avoiding watches with bezels as my success rate with them is terrible......please help!! In short I am asking: What am I doing wrong? What is the best method for removing bezels - how do you do it? What is the best method for replacing bezels - how do you do it? Any tips or tricks? Thanks  
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Amplitude still seems low, but I'm going to let it run in a bit and revisit. Meanwhile, got the first layer of the calendar works together and made sure the date ring snaps to both in quickset and regular setting. The mechanism is pretty cool, so I took a video.  
    • AliCat
      Hello!

      By AliCat · Posted

      This is the part that need replaced if anyone can point me in the right direction. 
×
×
  • Create New...