Jump to content

Which EB 8800 part?


AshF

Recommended Posts

Hi all,

I have an EB 8800 on the bench and the third wheel has broken.

IMG_20200909_230734.thumb.jpg.3ace562e30de394f9cae80884ef817d7.jpg

I see from the service sheet that this piece comes in two flavors.  

image.png.e06fb6e9ef8d9d9e8bf6a746b7a0a15e.png

But I don't know which one I need.  Cousins have them both in stock and listed as...

Third Wheel ( 210 ), EB 8800

Third Wheel, Upper Conical Pivot ( 217 ), EB 8800

 

Any ideas how I could find out?  I would hazard a guess that I need 217 as the remaining pivot I can see has a conical end?

 

Many thanks,

Ash.

 

Link to comment
Share on other sites

Yeah, I thought the pivot was broken, it looks a bit short.  I will use this broken part to practice on.  Not to derail my original question, but by peen do you mean hit it with a staking set to close the hole a little?  If so, which stake would you use?

Link to comment
Share on other sites

The hole looks shagged to me and will likely turn untrue if just closed with a stake. 
 

I think you may need the cone bearing type as it’s unjewelled - check the remaining original pivot to confirm the profile of the tip. 

Link to comment
Share on other sites



×
×
  • Create New...