Jump to content

How Bicycles are made (in 1945)


Recommended Posts

It never ceases to amaze me what you can stumble across whilst looking up something else on the web.

I was looking for help on replacing the failed hydraulic disc breaks on my 15 year old mountain bike, but instead discovered a gem of a video on how bicycles were made in Britain back in 1945.

Enjoy the video if you have nothing better to do for the next 17 minutes and 22 seconds.

 

Edited by Tmuir
fixed link
  • Like 4
Link to comment
Share on other sites

They built them to a different standard to modern day bicycles. My brother in law still nips down to town on his pre ww2 Raleigh, leaves it out side the bookies unlocked as he's always done. Weighs a ton with rod operated brakes so doubtful if anyone would "borrow" it. Looks a little tired now but rides lovely for its age.

Sent from my moto g(8) power lite using Tapatalk

Link to comment
Share on other sites

I cant afford another BSA motorcycle to restore, but want another project so I'm on the lookout for a BSA bicycle now, preferably 1940s to early 1950s and in particular I want one fitted with a 3 speed hub, but they are not that common where I live.

Link to comment
Share on other sites

With lockdown there's been a mad rush for bicycles over in the UK so you can't find a decent bike at sensibly price at them moment. (Good news if your selling of course [emoji3]). Give it 6 months and things may be different.

Picture of my hack attached, one of the last of the Nottingham built Raleigh's from the mid 90's on our usual post work stress buster.



e10a385247a674cc59759600f0d4ce20.jpg

Sent from my moto g(8) power lite using Tapatalk

  • Like 1
Link to comment
Share on other sites

I have always had fun with bicycles. I Appreciate  the geometry  of the English roadster. I think it is probably  the best  design for a bike ridden  every day. 26×1 3/8 Tires  with thorn resistant tubes  are also a good  choice. They won't  go flat  easily  like the skinny high pressure  things ,and they aren't  a bear the peddle like mad and go nowhere  like the tires on a mountain  bike. For those of us who refuse to wear  spandex. The roadster is just the thing.

Link to comment
Share on other sites

Bicycles are another fixation of mine.  I like to work on them almost as much as I do watches.  I tend to make my tools and skills available to the neighborhood kids who nedd work done on their bikes.  

I also always wanted an early motorbike, like from the 'teens to early twenties. Being tremendously expensive though, I had to find another way.  So I built one.  This here is "Tempus" (because time flies).  It has the frame of a 1948 JC Higgins balloon-tire cruiser, to which I bolted a 50 cc two-stroke engine.  I fabricated the tank, the headlamp (which is actually electric) the clutch lever, and a number of other little parts.  It has a leather saddle and a little leather-covered trunk.  It's not very fast, maybe 30 mph tops, but for in-town it does very well.  And it's almost theft proof, in that nobody has anything vaguely like it for miles around.

IMG_20120612_204005.jpg

  • Like 4
Link to comment
Share on other sites

If bikes of all kinds are your thing, and you find yourself in Glasgow then I highly recommend the Riverside Museum (actually even if bikes are not your thing).

image.thumb.png.23beea11770f8a92cc40fb0e4e27b5e4.png

 

image.png.f3e4214a78fea1598da19740336a6bf3.png

 

Click the links for a little more of a flavour of the place.

https://www.tripadvisor.co.uk/Attraction_Review-g186534-d214166-Reviews-The_Riverside_Museum_of_Transport_and_Travel-Glasgow_Scotland.html#photos;aggregationId=101&albumid=101&filter=7&ff=390872885

You can easily spend a day in the place.

The Riverside is second (in my opinion) only to the National Museum of Scotland in Edinburgh as must see museums round here.

The NMS also has some interesting cycling exhibits.

https://www.nms.ac.uk/explore-our-collections/stories/science-and-technology/bicycles-at-national-museums-scotland/

 

Edited by AndyHull
  • Like 4
Link to comment
Share on other sites

Bicycles are another fixation of mine.  I like to work on them almost as much as I do watches.  I tend to make my tools and skills available to the neighborhood kids who nedd work done on their bikes.  
I also always wanted an early motorbike, like from the 'teens to early twenties. Being tremendously expensive though, I had to find another way.  So I built one.  This here is "Tempus" (because time flies).  It has the frame of a 1948 JC Higgins balloon-tire cruiser, to which I bolted a 50 cc two-stroke engine.  I fabricated the tank, the headlamp (which is actually electric) the clutch lever, and a number of other little parts.  It has a leather saddle and a little leather-covered trunk.  It's not very fast, maybe 30 mph tops, but for in-town it does very well.  And it's almost theft proof, in that nobody has anything vaguely like it for miles around.
IMG_20120612_204005.thumb.jpg.063de8274a31100f9a89f99b42a618e5.jpg
Looks very similar to Peewee Herman's bicycle [emoji106]
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That would be something! Which brings me back to;  
    • you think you're going to sleep tonight you're not, you're going to ponder the question of what makes you think those of the right parts?  
    • Does anyone knows what size case a need for a dial diameter 20.60mm?
    • Sounds like the story with my Rolex. Poor (expensive) job done by an official Rolex dealer with an "in-house" watchmaker, hence I learned watchrepair and did the servicing myself. Same story as I learned with the Omega 861, again poor job by an "in-house" watchmaker by an official Omega dealer. Once your watch goes through that back-door, you have no idea what is going to happening to it 🫣   Quite nice that they sent back the parts which had been replaced !
    • yes that's definitely not right at all. I have a picture one of my friends has a Omega coaxial there was having issues to lose asking me where he should send it. As that's a specialty watch I suggested the service center. When he got it back he sent me a picture so the replace the dial as you can see the hands the mainspring barrel and I think the price was really quite decent considering all the stuff they can replace. So I do know they do change the barrels but the other person I worked at the service center when I would ask questions and unfortunately I can't remember all the answers. I think a lot of the changing a parts is at the discretion of the watchmaker. Plus I don't know enough about the chronographs and whether that would be considered a vintage watch? I take some of the vintage watches may have been sent directly to Switzerland or another service center. Obviously with a watch like the one down below they probably have a infinite supply of parts is its relatively modern vintage stuff becomes more interesting even the watch companies don't have necessarily infinite supply of parts. But no matter what the watch shouldn't disintegrated six months that's definitely an issue.        
×
×
  • Create New...