Jump to content

My Watches (So Far!!!)


vaguras

Recommended Posts

Hello guys,

 

after being introduced myself, I would like to share with you my watch collection so far:

To begin with, my everyday watch a Swiss Davosa (model insight - discontinued) with the robust ETA 2824-2:

 

post-684-0-94203500-1423949219_thumb.jpg

 

An older automatic Citizen watch with a 6001 caliber (from 1976 - year of my birth as well). I found it in a drawer of a retired old watch repairer non working and managed to give its life back! 

 

post-684-0-10345300-1423949371_thumb.jpg

 

Next, goes a Citizen eco-drive the popular nighthawk model, a gift from my wife some years ago:

 

post-684-0-14003500-1423949496_thumb.jpg

 

A classic new series (from 2010) SEIKO 5 automatic, bought second hand from fleamarket as NOS only 40 Euros :

 

post-684-0-39468100-1423949598_thumb.jpg

 

An old SEIKO 6319 with the TV style case, a gift from an old friend, non working at the moment since the balance spring is torn!

 

post-684-0-91993700-1423949681_thumb.jpg

 

Another SEIKO (what else haha), a hand wind one, Skyliner from 1967, repaired by me after a serious drop of my friend's father, who wore it while he was building a house from scratch. Fortunately only the pallet fork was broken and the acrylic crystal:

 

post-684-0-30605500-1423949852_thumb.jpg

 

An automatic YEMA sous marine, with a FE (Franche Ebauche) 4611A bought lat year as NOS for 30 Euros:

 

post-684-0-87971600-1423949933_thumb.jpg

 

Last but not least an old classic Longines 23Z from 1954 bought recently and trying to repair (needs a new mainspring as the old one is set and a new setting lever screw):

 

post-684-0-98207600-1423950018_thumb.jpg

 

 

That's all folks!!!

 

 

Link to comment
Share on other sites

Photos of the movements as promised!!

First the old citizen of 1976 (cal. 6001):

 

post-684-0-33226400-1424127368_thumb.jpg

 

post-684-0-51077800-1424127372_thumb.jpg

 

The Davosa with the ETA 2824-2 (nothing fancy here):

 

post-684-0-49613500-1424127446_thumb.jpg

 

The Longines 23Z from 1954 (notice how the bad setting lever screw has damaged the barrel plate!)

 

post-684-0-54297500-1424127450_thumb.jpg

 

My regular seiko 7s26:

 

post-684-0-40081200-1424127454_thumb.jpg

 

The old SEIKO 6319 with the missing balance (fortunately I have found a replacement!):

 

post-684-0-08721000-1424127458_thumb.jpg

 

The handwind SEIKO Skyliner of 1967:

 

post-684-0-02804300-1424127462_thumb.jpg

 

Finally the YEMA with the FE 4611A:

 

post-684-0-08837800-1424127465_thumb.jpg

 

post-684-0-46728300-1424127469_thumb.jpg

 

I apologize for the not so good  quality of the photos, but I do not have a macro lens on my camera yet (an olympus E-PM1-mini mirrorless).

 

Cheers

 

Evan

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...