Jump to content

Tools, oils, and consumables for the hobbyist and beginner.

DrG

By DrG
in Tools & Equipment

 Share

Recommended Posts

DrG Watch Enthusiast

DrG

Posted
Posted

Hi everyone, 

I put together this document after my experience with watch tools and oils as a hobbyist. This is my humble opinion based on my reading and experience. I understand some things (like the lubrication) may not be up to standards, but I tried to make this with the beginner/hobbyist on a budget in mind. All suggestions are welcome and please post your experience as well. 
 

I have attached it as a PDF for simplicity. 

I would also like to thank everyone in this forum and especially Mark Lovick for all your teachings and suggestions. 

best,

Guido
 

 

Tools for the Hobbyist.pdf

  • Like 4
  • Thanks 5
Link to comment
Share on other sites
DrG Watch Enthusiast

DrG

Posted
  • Author
Posted
2 minutes ago, homeyclown said:

Your timing is perfect! Turns out I picked the same amazon screwdrivers as you did, great minds think alike :)  Appreciate you putting the information together.

Thank you! :)  I am certain you will really enjoy those screwdrivers. They have proved excellent for me. 

Link to comment
Share on other sites
DrG Watch Enthusiast

DrG

Posted
  • Author
Posted
23 minutes ago, pubudeux said:

This is a really great guide. The only thing I'd add is finger cots (sorry if it's there and I missed it).

Thank you for catching that! I totally missed it! Yeap, finger cots are super important!! Thanks!!!

Link to comment
Share on other sites
  • 2 weeks later...
DrG Watch Enthusiast

DrG

Posted
  • Author
Posted
3 minutes ago, Tanstaafl said:

Thanks.  I'm about to try fixing/servicing a pocket watch so this is really helpful.  Is a mainspring winder important?

Hi! Thank you I am glad it was helpful.
 

For a pocket watch movemen, such as a ETA 6497 movement or similar, the mainspring and barrel are big and sturdy enough that you can wind them by hand. However, winding by hand is Generally considered bad practice as you can bend or kink the mainspring which will render it useless. I have wound mainsprings of pocket watch movements by hand and have been successful, however have gotten struck in the face a couple of times by flying mainsprings hehe  

Mainspring winders are VERY expensive, though there are cheaper alternatives on ebay (link below). If you are only the service a watch every now and then, I would just consider buying the mainspring new. It comes prewound and pregreased and all you have to do is push it into the barrel. :)  Cousins UK (https://www.cousinsuk.com/department/watch-parts) has one of the best selections of mainsprings. Please see below for links on good videos on how to measure mainsprings. 

Measuring/choosing mainsprings:


eBay winders:

https://www.ebay.com/itm/283723390915


Winding mainspring by hand:

 

hope this helps,

Best,

Guido

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JohnR725
      Blew it with a coil

      By JohnR725 · Posted

      the problem with vintage watches and yes quartz watches can be vintage is availability of parts will be a problem. I have a link below where we can cross reference the coil and  I was hoping for more. Another problem for vintage parts are everyone on the group gets used to ordering from online. Conceivably the physical material houses that still exist out there might have the part and you'd have to reach out to them and see if anyone has one. this is because they don't list every single part that they have online with the exception of cousins where everything they do is online work just doesn't exist but the other material houses can have stuff not listed. Otherwise just set up a search on eBay and sooner or later it will possibly show up if you're lucky.   http://cgi.julesborel.com/cgi-bin/matcgi2?ref=SEK_6020A  
    • watchweasol
      Self introduction

      By watchweasol · Posted

      Hi welcome to the forum.    Enjoy
    • JohnR725
      Pocket watch escape wh

      By JohnR725 · Posted

      the bestfit book refers to Revue as wittnauer and the fingerprint we have this.
    • Waggy
      Difference between AS 1686 and ST 1686

      By Waggy · Posted

      Maybe a little off-topic, but it still amazes me that most people (and myself before I got into this hobby) don't realise that the movement of their watch was (in most cases) not made by the name on the dial of the watch. This is especially true of many 'fashion' watches which use the cheapest of cheap movements ($4 each) which are completely out of proportion to the overall cost of the watch ($++100s). Usually the actual manufacturer is stamped somewhere inconspicuous on the movement, usually around the balance, and this is what you need to find so you can locate spare parts or servicing manuals etc. This is like buying a top of the line Rolls Royce Phantom and learning it has a BMW engine..... oh wait a minute, it does! (6.75-liter, 460-horsepower BMW V12 engine - reference)
    • JohnR725
      1944 bulova a-11 trouble removing movement

      By JohnR725 · Posted

      I have an image of what the case is supposed to look like disassembled. then an interesting website https://www.mybulova.com/vintage-bulova-catalogs there's all sorts of interesting things here for anyone in watch repair. but for the particular subject these are the two I recommend. You can see page 7 is where I got the image of the case. Then the word apartment technical manual is really a training manual of watch repair covers wristwatches and pocket watches everybody should have a copy of this.  
×
×
  • Create New...