Jump to content

Time To Wind Down.


Recommended Posts

  • 10 months later...
1 hour ago, david said:

I had two visits to England back in the 1990s. My favorite brew was THEAKSTONS OLD PECULIER.  

david

Don't seem to find a dealer in my region, but it sure sounds wonderful from what I just read.

Guinness is my favorite of what is available here.  They throw hops into it for export but what can I say...  Most of the beer made here is filtered through goats.  Little known truth!

When I was working and the pressure was on, a pint of Guinness - sip off the head - add Jameson to top off the glass and watch your cares slip away.

Link to comment
Share on other sites

  • 3 weeks later...

For many years the beer available in the USA was horrible. Times have changed and there are a number of craft breweries that make excellent beer. My area (Atlanta, Ga) has an excellent brew called SWEETWATER ALE. I love beer but had to switch to wine as it tended to make me fat.

david

Link to comment
Share on other sites

  • 4 weeks later...

@david please don't take offence at my disrespect for Laphroaig; it is in jest only, specifically because I knew it would provoke a reaction from someone :D:D:D

I am very much a whisky drinker, in fact it's just about the only spirit that I drink, and single malts are "my thing", although I also belive that a well crafted blend can stand its ground too.

I am familiar with Laphroaig first hand but be true it is not my favourite as I tend to gravitate more to the less peaty brews. Lagavulin (Laphroaig's neighbour) is about as phenolic as I'm comfortable with as it does a better job of taming the "creosote", but if your preference is for something a little livelier and a bit more "in your face" then Laphroaig is your ticket, and no man has the right to tell you that your wrong.

There is no such thing as the wrong taste in whisky, just different tastes :-), and mine tends towards the sweeter Speyside distilleries, but I am always open to experimentation.

Good health !!!

 

Edited by Marc
spelling
Link to comment
Share on other sites

It is all an acquired enjoyment.   Cast Strength Laphroaig is mixed 50/50 with water and goes a long way!  It's economical!  Can never find it in the hinterlands of the states so I love those who don't like it!  Leaves me a hope for another score.

But Speyside, I use for a balance dip! ;) 

Link to comment
Share on other sites

  • 4 weeks later...
  • 4 weeks later...
On 1/18/2020 at 8:38 PM, jdm said:

Some liquid wisdom in this topic! I had to start from zero again and in my frugal style I tried to buy value. Should last for the rest of the winter. 

 

 

DSC_0168-800x600.JPG

I used to live in Scotland and used to do the whiskey trial (multiple, multiple times :biggrin:). I see you have the malt Glenfiddich. Glenfiddich is from the Grant's family, so there is the "Grant's"-whiskey, a blend. Same shape bottle, with 95% Glenfiddich malt but 1/2 price. Just FYI ;)

Edited by Endeavor
Link to comment
Share on other sites

1 hour ago, Endeavor said:

I used to live in Scotland and used to do the whiskey trial (multiple, multiple times :biggrin:). I see you have the malt Glenfiddich. Glenfiddich is from the Grant's family, so there is the "Grant's"-whiskey, a blend. Same shape bottle, with 95% Glenfiddich malt but 1/2 price. Just FYI

Maybe, but if I recall, one comes from the industrial scale big distillery plant in Girvan, and the other from the quaint little distillery in Banfshire.. not that I suspect it makes that much difference in reality, but it kinda spoils the illusion.

I'm not much of a drinker these days, but if you want something a little more subtle, try the Glengoyne, or maybe a little Higland Park.

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Yes @SwissSeiko, most of us here are just hobbyist and some horological products are simply too expensive. For example, cleaning fluids. I think even you find L&R cleaning fluids expensive. But I haven't found anything that shines up parts like #111. So I just bite the bullet and fork up the $$$. Here in Singapore, a bottle of #111 is $180SGD. ($134USD) The Rinse #3 is the same price. Oils like 2ml of Moebius 9010 is around $45SGD. Imagine if you had to fill your car engine with 5 quarts of 9010! I have been using odorless kerosene to preclean my parts before putting them into the #111. The kerosene does such a fantastic job that I may use that in place of the Rinse #3. But I can do without the #111, but now its role is just a brightening agent.  So my cleaning regimen will be kerosene, #111, kerosene and IPA. I see how that works out. I might even re-distill my used IPA to save even more.
    • What works for you, is good enough for me. You and I have great interactions on here, and you've taught me some things! I guess I should approach things with the thought process that most of the users on here are probably doing this as a hobby. I find myself reading some posts and thinking, that's definitely not how I would do it. But I do this for a living, I have overhead costs, bills to pay, taxes, tooling costs ect., and to many on here, it's probably just fine to do it as is necessary to work. So I'm probably a little overzealous when it comes to finishing. You should know, we(for sure at least me) appreciate you. If someone chimes in on my posts, it's usually you, and you're a good chap!
    • Hi. Just curious. Is there an official service center for orient in your area?  I had a problem with my orient mako before. I was regulating the movement and lost focus on what I was doing. I accidentally hit the balance wheel . I had the same issue in finding parts for it so I ended up sending it to the official service center here in the Philippines.
    • I think it was HectorLooi that posted some information at the time that we were discussing what materials to use for cleaning jars in an ultrasonic machine. It was decided that steel jars transmit the cavitation bubbles better than glass or plastic, which was considered the worst as it absorbs their energy. So I've tried a few different cleaning solutions, mostly non-proprietary watch stuff. There is a thread I made last year experimenting , actually I might have tagged it onto someone else's thread,  I can't remember.  Just mirror residue and evaporation rates. 🤔 Elma pro ammoniated,  paraffin,  ligher fuel , Ipa, meths, and I think break cleaner was in there as well. Elma and paraffin have a very slow evaporation rate, probably days. Both have wetting properties and are far reaching, paraffin being very much so, if you're looking for a deep cleaning solution then paraffin soaks well and finds every nook, cranny and crevice. When I use paraffin which is usually if I hand or US pre clean then i place the parts on absorbant tissue  afterwards to soak up the excess then spin them off and use IPA or break cleaner to rinse them off after that a rotary wash with elma and ipa for rinsing . I don't use a US that much, really just if any wheels and pinion leaves are really gunked up, which is when I hang them on the little wire tree. I kind of base how i will clean by how dirty and gunked up the movement is. If it's bad the procedure will follow : soak in paraffin for a couple of hours, peg out plate and bridges and hand clean what I can with a small brush to remove the bulk. Then onto the USM, some parts that can be hung go on the tree like wheels etc,  others that can't go in a slow rotating mesh basket, all in paraffin, the USM  loosens the crap up . Then put them in a rotary basket, spin them in paraffin, spin off the excess, then in elma then 3 rinses in IPA. That's like the full valet, if the movement is really dirty. The parts that don't get that treatment are the balance complete and the pallet fork, which I really like to clean by hand.  Screws and springs I also won't put in a machine, too easily lost, these are easily cleaned by swishing them in a jar of whatever you fancy . If I get a really stubborn sticky hairspring, that will be removed for cleaning separately, brreak fluid is good for that or tetrachloroethylene. Thats one way to get rid of the mother in-law, at 85 yrs old mine is heart attack territory.....🤔....I could accidentally have an envelope with certain contents fall out of my jacket pocket onto her dining room table...accidentally....🤔
    • Yeah, that's the guy. I told him it's cheaper if I just send the pictures to my  mother-in-law directly. 😮 
×
×
  • Create New...