Jump to content

Seiko 4402 shattered jewel

Franksu
 Share

Recommended Posts

jdm Distinguished Member

jdm

Posted
Posted
7 hours ago, Franksu said:

where can I get spare parts or could someone has any experience of this movement, need advice or technical support,thanks.

There is no secrete place for spare parts. What we can find on the internet, you can too. In many cases people uses donor movmment or complete watches. Beside, I never seen individual Seiko plated jewels for sale. 

BTW, we have a section here where it's considered polite for new members to introduce themselves.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Razz
      404 Club

      By Razz · Posted

      Not SS but very slight wear on the underside edges have a little brass showing under magnification. New crystal arrived £3 with tax. Nice champaign dial color.
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      I also just realized I had that tech bulletin saved...but in French for some reason 🙂 No, I don't speak French. 2172_Bulova 11AOAC 11AOACD 11AOACB.pdf While parts are drying I'm on the hunt for a replacement crystal. I can measure the opening and get a generic one, but it'd be nice to find out what the original looked like first. Of course, case code 3093 does not appear in any of my reference materials. JulesBorel lists a C3093 case code, and shows Bulova part # 1222-5. Does anyone have information on this guy? I found a thread here talking about how the -5 is the height of the crystal, but that's as far as I've gotten. I also found one site that claims to have it in stock, but before I risk my $20 I'd like to confirm it's the right part.  
    • steve1811uk
      Oversized stem

      By steve1811uk · Posted

      Thanks for the replies. I did the job today and found that the oversized stem fitted just perfectly into the worn mainplate without any adjustment. Original stem diameter was 1.24mm and the oversized was 1.40mm. I did have to make an adjustment to the setting lever though. The small pip that engages with the groove in the stem hub was slightly to wide. I made that a bit smaller with a fine file. Don't ask me why that was too big, it just was. All working very well now. No wobble and not pulling out. New crown fitted as good measure.
    • eccentric59
      Hello fellow watch enthusiasts!

      By eccentric59 · Posted

      Welcome to WRT. 
    • fnick
      Hello fellow watch enthusiasts!

      By fnick · Posted

      Hi Vandan. Hi from a fellow newbie! Marshall has got a lot to answer for hasn't he! 😄. I also got hooked to this hobby after watching his videos.  Good luck with your journey to service your Grandfather's watch.   Nick 
×
×
  • Create New...