Jump to content

Case for Seiko NH25A Movement

nlapietr
 Share

Recommended Posts

nlapietr Watch Enthusiast

nlapietr

Posted
Posted

Hello all,

I watched a video on assembling your own watch from parts on ebay and got so excited I promptly ordered parts that don't work together.  I purchased a Seiko NH 35A movement and a 28.5 mm dial and hands.  These all work great together.  However the case I bought was WAY to big.  I have been searching all day for a case the correct size but cannot find anything.  Any suggestions on sources or other ideas?

Thanks in advance for any advice.  I love the videos and discussions.

Nick

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted

I think the nicest cases you can get are from Seiko 5 watches. Any cheap 700x or 7s26 one will do. Stainless Steel, so can be repaired and polishing perfectly.

Otherwise you will have to spend a lot of time and effort adapting.

Link to comment
Share on other sites
nlapietr Watch Enthusiast

nlapietr

Posted
  • Author
Posted

Ok, so here is the next dumb question.  Would a chapter ring fix the problem and how do you know how to size (probably going down from about 38MM to 28.5?  Are there standard size charts somewhere?

 

Thanks again.

 

Nick

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
11 hours ago, nlapietr said:

Would a chapter ring fix the problem and how do you know how to size (probably going down from about 38MM to 28.5?

No. The chapter ring is the one that may sit on top of the dial, with minutes or other markings. Perhaps you are referring to a spacer, or movement ring. Your NH35 comes already with one of grey plastic one. If it's size is not adequate, a watch manufacturer would replace it with a different one.

11 hours ago, nlapietr said:

 Are there standard size charts somewhere?

There are no standards. Movement size can be expressed in old French lines but that is just indicative, then each movement has a technical drawing for casing that show all the size including the very important hand and stem height.

If you are OK with bodging up an holder ring, there are assortments that you can buy, or use whatever common material at home. Otherwise making it perfect requires 3D printing, or precise metal turning and milling, even if hand made.

Link to comment
Share on other sites
AshF WRT Addict

AshF

Posted
Posted

If you have a 3d printer then it's possible to make a movement holder to position the movement correctly inside the case.  I've done this for a custom watch I made.  I also printed a dial is it was a skeletonised movement.  It takes some time and effort to get right, here's my prototypes...JyCoBLI3OZ4ILpEfte4GB37r7aZfsQz5d2nJZ0qPkSP1pw8BZH3ZvqmpszDxHQpJd1yrbr8mz-E1FQD7slljks30nYDV7SOfuHMXgHzIQFB99f07bLNjGF_rQ-oqO6ZK6OYptz-C6dqSCBCf_rjTn_eD0fPqOg9skqYZFmg3azsxJjxOsoP79vN7Q6gviTOdfIDYTPJZiQr61yqZPyYP_YAdaapJBzo5W66cWOYlDA-rPFewHKhZOAl90ebEIibf53Or83O4S-lsCUifFuoe5fp91aQ1HPHX85R6P2M5z7nzZuZc7Z8b2qv0Y6DkLN8iw5EIfpM8Ti8GcD48e7goxrD-bx94UF7_9lsLLvfKdgWROmpFLkCdhQgu4WkodZVBlm-DER0Pnd-EUb75q1b79v6tWVX0rGVnJNeCXkU1t_djrwCfNEJ63B95vhkfDC8Fc-LvlNTHUTL1WgYl_Ro89ACMUNpQjXnLIhWFNveUOHAC0wqKkBkCRX-IBjQujohtecLbL3UVXCuPwKBObHyifB1H3VpzWQJv62jIvbf2gNcREs38-FeGJRNkl7egi5GWFpIKFYdnrQKD807PcTpyVBJFVlwB9cOdJsApEHWHwXOVMZNDOsAmcIGxTRMK6wte_zUq5wCiImxgPCCGdP5giQlDKG2H7xn--hDEf6eOuA0V5-vbMmrHQWCk=w847-h1129-no?authuser=0

  • Like 2
Link to comment
Share on other sites
yankeedog Distinguished Member

yankeedog

Posted
Posted

If you are not opposed  to used parts try speedtimerkollektion. You can buy used cases in lots. 28.5 mm dial diameter  is pretty  much a seiko standard  size. Pay attention  to stem location. It varies 

  • Like 1
Link to comment
Share on other sites
  • 2 weeks later...
WatchCodger New Member

WatchCodger

Posted
Posted

There are now many suppliers of aftermarket cases for Seiko 72XX and NHXX movements. Have you looked up CrystalTimes? Theirs are  SKX-type (diver) cases that accept the parts you have (in addition to others required). Namokimods just announced "Rolex Explorer" style cases (two vintage sizes) that accept the parts you have. The later are currently pre-order. There are others as well.

My apologies if you've figured this out already!

  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
1 hour ago, WatchCodger said:

Theirs are  SKX-type (diver) cases that accept the parts you have (in addition to others required).

Seiko diver's knock-off cases starting $99?

Fat springbars $22?

Ahaha! I'll rather buy the genuine article, or if it is about made in China, at their real prices.

Link to comment
Share on other sites
WatchCodger New Member

WatchCodger

Posted
Posted

Is there such thing as a JDM SKX case, specifically? Is the case from an SKX007J made in Japan? You can't get an SKX OEM case, seperately, now anyway. My personal "knock-off" SKX cases are at least as nice as my OEM ones, if not better (drilled lugs). $79 should about do it for an aftermarket SKX007 case, which sounds pretty good given the current $250+ full price for an OEM SKX007J from a reputable online seller (way up since being replaced by the new "5"). Sure, grey market is cheaper.

Fat spring bars should be about $6/pair from any seller. $22?

  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
3 minutes ago, WatchCodger said:

Is there such thing as a JDM SKX case, specifically? Is the case from an SKX007J made in Japan?

There is not, only the dial and rotor change on these.

3 minutes ago, WatchCodger said:

You can't get an SKX OEM case, seperately, now anyway.

You can, but at exorbitant prices. https://www.cousinsuk.com/category/filter/seiko-case-parts and search 7S26-0020.

3 minutes ago, WatchCodger said:

Fat spring bars should be about $6/pair from any seller. $22?

Sorry, $14 a pair on Namoki. Easy to find for much less any of their items.

Link to comment
Share on other sites
WatchCodger New Member

WatchCodger

Posted
Posted

So it sounds like, if someone is interested in an SKX-type case they can buy the exorbitantly priced "genuine article", which could be made in China -- or a high-quality aftermarket case, undoubtedly made in China, for a reasonable price. Given that the aftermarket options have proven their quality and value to me, I can recommend  them.

  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
4 minutes ago, WatchCodger said:

So it sounds like, if someone is interested in an SKX-type case they can buy the exorbitantly priced "genuine article", which could be made in China -- or a high-quality aftermarket case, undoubtedly made in China, for a reasonable price.

Or buy a complete diver's for about $100 and if it's only for the case, have a lots of spare parts.

Maybe is just more practical to wear a complete, original Seiko watch as I had suggested before.

Link to comment
Share on other sites
  • 2 weeks later...
nlapietr Watch Enthusiast

nlapietr

Posted
  • Author
Posted
On 7/16/2020 at 1:45 PM, WatchCodger said:

There are now many suppliers of aftermarket cases for Seiko 72XX and NHXX movements. Have you looked up CrystalTimes? Theirs are  SKX-type (diver) cases that accept the parts you have (in addition to others required). Namokimods just announced "Rolex Explorer" style cases (two vintage sizes) that accept the parts you have. The later are currently pre-order. There are others as well.

My apologies if you've figured this out already!

Thanks.  I have not solved it yet and was just going to live with it.  I just find it ugly and will definitely look at these suggestions!

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mikepilk
      Setting lever spring

      By mikepilk · Posted

      I would harden and temper (to a light blue). It's so easy to do and only takes a couple of minutes. A search on ebay UK for "spring steel strip cs" finds plenty available in small quantites and thicknesses from 0.1mm up.  But the question is ( @nickelsilver) which "CS" number is best for watch parts ?  Also, from one of the ads : "CARBON SPRING STEEL. SIZE IS METRIC 15.00mm X 0.10mm X 304 MM  CS100 FINISH BRIGHT . HARDENED AND TEMPERD TO 480-530VPN" I've no idea about 480-530VPN. Does that mean it needs annealing before working?      
    • Waggy
      Movement holder made with 3D printer

      By Waggy · Posted

      Here is the insert ring for rectangular or elliptical movements: Note that the length is the side with the stem cut out on the spreadsheet (in the picture below this is 15.15: Here is the fake pdf file, again you need to convert to .zip after download to access the FreeCAD and 3mf files. Rectangular insert disc.pdf    
    • JohnR725
      Omega cal. 565 - low amplitude

      By JohnR725 · Posted

      as you took the mainspring out what did it look like? It's amazing how much amplitude you can get if the mainspring actually has the proper shape. last week I was doing a 12 size Hamilton and was very much surprised with the beautiful back curvature the mainspring had. Then the watch had a really nice amplitude the group would be so proud it was 350 until I dropped the lift angle down to 38 that drop the amplitude quite a bit below 300. then with the beautiful back curve it still had really nice amplitude the next day. I really wish all my mainspring's look like this as the watch had beautiful amplitude the next day. So many of the aftermarket pocketwatch Springs I see now do not have anything resembling a back curve may be a slight curve and that's about all. They still work but they just don't work as nice as a properly made spring. then Omega as all sorts of nifty technical documentation unfortunately every single corner is watermarked with where it came from who downloaded it etc. very paranoid company. On the other hand I will snip out images like from the document on recycling a mainspring barrel. for instance here's the section on what your mainspring should look like. water damaged a lot of times means rust was there rust on this watch?
    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      I wondered that?
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      I dont understand why a patreon membership would have limited places ??
×
×
  • Create New...