Jump to content

ETA 2824-2 Amplitude


DrG

Recommended Posts

Hi Everyone,

Just received a brand new ETA 2824-2 and put in on the timegrapher. Amplitude is in the low 190’s. Highest is 196 dial down. Maintains that low amplitude in at least 5 positions. I did adjust lift angle of the timegrapher to 50 degrees. I am tempted to service it, but since it is new I wanted a second opinion. 
 

thanks

Link to comment
Share on other sites

8 hours ago, VWatchie said:

Three very important words! Try to get as close as you can to where the mainspring slips.

That was the most important part. Left it overnight running and wound up full today. Amplitude is now 306! :)  

  • Like 2
Link to comment
Share on other sites



×
×
  • Create New...