Jump to content

So much waiting

sjhilbel
 Share

Recommended Posts

sjhilbel Member

sjhilbel

Posted
Posted

I know many of you are more established in watch repair, so you have the tools and a decent collection of watch parts to pull from.  I've worked on a Seiko that took a number of weeks to get parts for. I started a Vostok which needed parts, but I won't be getting what I need until August.  How does one maintain a more consistent work cycle? How/where does one start building up their watch parts collection to eliminate these long waiting times?  I used Esslinger and CasKer in the US for parts. I've considered CousinsUK, but the shipping is usually more than the part cost.  I needs to tips on how to maneuver within the parts realm better.

Link to comment
Share on other sites
spectre6000 Distinguished Member

spectre6000

Posted
Posted

Seconded.

I find another major limiting factor is not knowing in advance (yet) what I'm looking for, and shipping costs, even from domestic suppliers, eats a good percentage of my budget. I need a part that I can only get from one supplier, but it feels silly to pay out the nose to ship something tiny, so I put it off until the next time I have enough of an order that the shipping makes more sense. Hopefully I don't forget in the interim....

From the perspective of a fellow hobbyist, I think volume and pace are working out to be helpful for me. If I have something else to work on, it doesn't bother me all that much to reassemble into a minimized holding pattern state, and come back to it later.

Also helpful is a 6 month old. She only really lets me work every couple of days for an hour or two after dinner. Slows thing down a bit.

 

  • Like 1
Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted

Specialize in limited number of calibers and brands. That way, you get good at all the technical  ends n outs and a used or new scrap movement can be  your material house to the last drop.

A good example of this is jersymo, knows and has everything about timex.

  • Like 4
Link to comment
Share on other sites
eccentric59 WRT Addict

eccentric59

Posted
Posted

Look for donor movements on eBay. Sometimes you can get an old watch for parts with free shipping for the same cost as the single needed part plus shipping. When you're done you have the rest of the donor watch for parts. If you stick with a few calibers as Nucejoe suggests you'll have a drawer full of spares in no time.

  • Like 2
Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted

As a jobber one best directly go to a brand that the owners can afford and do pay for service, repair costs.

Who would pay 40 bucks to have a $30 timex repaired. or a seiko which would be worth 60 buck after repair. 

As a hobbyest or collector, you go with the rare, collectible ones and are ultimately looking at a hefty profit on your investment. 

A 6497 movement in luxury brand is of higher grade than one in a low end watch.

A brand popular in certain region may not be in another.

So I find out the  brands popular in your region. Nowadays everybody thinks Omega.

  • Thanks 1
Link to comment
Share on other sites
JerseyMo Distinguished Member

JerseyMo

Posted
Posted

so as much as people like to bash EBay there is no other single resource that will help you find parts. Best to buy up watch maker estate lots.  But one off deals can be found too. I now buy parts of my watchmaker friend because his supply house doesn't have them. Most recently it was a pusher for a Tag. Before that it was a third wheel for Rolex.   

As for those Timex parts. yes, I have more than I could ever use. They are years of accumulation and many deals made with other collectors.  I did pass on one deal where I was offered the contents of a 16' x 10' storage locker full to the top.  All NOS Timex.   hmm maybe I should ask if its still available :)  see what this hobby does to you!

  • Thanks 1
Link to comment
Share on other sites
sjhilbel Member

sjhilbel

Posted
  • Author
Posted
14 hours ago, JerseyMo said:

see what this hobby does to you!

HA! I am finding this out quickly! eBay has been a great source for me. I have yet to tap into estate sales. I've also been watching Goodwill online. They've had some good deals, however their service is very clunky and I tend to forget about them.

Link to comment
Share on other sites
JerseyMo Distinguished Member

JerseyMo

Posted
Posted
1 hour ago, sjhilbel said:

HA! I am finding this out quickly! eBay has been a great source for me. I have yet to tap into estate sales. I've also been watching Goodwill online. They've had some good deals, however their service is very clunky and I tend to forget about them.

yes Goodwill is where I bought my first mega bulk load of vintage watches. Among which was a 1964 Timex Marlin that put me on this path. Only issue I have with it is that people tend to overbid.  Here is what you have to look forward too. 

space.jpg

  • Like 1
  • Thanks 1
Link to comment
Share on other sites
spectre6000 Distinguished Member

spectre6000

Posted
Posted

I wonder how many people on here are into vinyl... It's another in a long list of anachronistic interests of mine, and I suspect a similar thread can be found in many people on here.

My ideal evening involves vinyl, a nice beer, and a movement coming cleanly together. My record player is on the other side of the adjacent room, but with an open floor plan it works nicely save I have to get up every 20 minutes or so to flip or swap.

Link to comment
Share on other sites
sjhilbel Member

sjhilbel

Posted
  • Author
Posted
On 6/26/2020 at 1:48 PM, spectre6000 said:

My ideal evening involves vinyl, a nice beer, and a movement coming cleanly together.

@spectre6000, you just described my wish. We have a small collection of vinyls and the player is in another room, so I'll usually working on a movement with Spotify on. The only missing component to this ideal evening is the "movement coming cleanly together." It is few and far between for me so the beer is after to calm the nerves. Guess I need to start the work with the beer open first. ;) 

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • rjenkinsgb
      My first Gruens. Precision 510 and N510R movements.

      By rjenkinsgb · Posted

      Snap! I recently finished my Gruen 510 movement - though the case for mine is in a rather sad state; I'm going to try re-plating it (in nickel, it's not a gold one).   Re. the screws, I got a few of the one gram mixed batches from ebay. I've only needed a couple of screws for things so far, both rare, minuscule types - but both in the mix, after enough time sorting through them! The ones such as normal bridge screws are quite common in those lots.  
    • rjenkinsgb
      Any tips to correct a sloppy error?

      By rjenkinsgb · Posted

      Two pins or screwdrivers angled out slightly, pressing through from the barrel centre from the opposite side so they contact just clear of the hole in the lid? eg. Strap pin driver needles or similar.
    • Geotex
      Any tips to correct a sloppy error?

      By Geotex · Posted

      That's a good idea - shrinking down the nut and wrench size from the old casebook trick!
    • GuyMontag
      Movement holder made with 3D printer

      By GuyMontag · Posted

      I missed this earlier. The dial isn't going into the holder, it should sit proud of it. This is what I am currently using which I print for each different movement.    
    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      I didn't think pulling to set position would work harden the spring, in that position it is stressed where the arm starts. By work hardening i meant rapid polishing at that point, a bit like polishing a pivot work hardens as it compresses the steel. I doubt polishing by hand would achieve much in that respect though. Its finished, arm polished up mostly at the join to the bridge's main body. I'm ok with it, the screw holes aren't great as i had to open them up by redrilling and positioning it was difficult, I'm not much use with a loupe, opening up with a file might be a better option for me or i could just use the correct drill size 😅. And the detent is way too deep, i had to guess that with the stem release out of position and sat on top, but i only took one measure and went for it, no slowly slowly catch your monkey 😅. First go I'm happy , well sort of, it works and thats a big thing for me, next one will have a bit more finesse.  Anyone thats interested, after filing, i used a 2000 grade home made diamond  micro file and then 20 micron film, the film is much better than wet and dry, more stable to use and doesn't shed cheap grade grit everywhere , then auto polish on a sponge pad.
×
×
  • Create New...