Jump to content

Wes1946

WES1946

By WES1946
in Introduce Yourself Here

 Share

Recommended Posts

WES1946 New Member

WES1946

Posted
Posted

I just began this journey, ordered a tool kit from Esslinger, watched countless videos on you tube, and graduated myself to a level of ‘ready to disassembly tech’.  This was not a good move.  I grabbed an older Chinese CTI tourbillion and proceeded with my task at hand.  Before long I had the watch apart.  So any small parts I could barely see.  I proceeded to begin cleaning same and this may have been the beginning of my problems.  Everything wen refine until I began removing the balance wheel assembly.  The spring removed itself from the Rest of the piece.  I could go on but why?

So now I have this watch in 1000 pieces and no useable balance wheel.  Can’t find any reference numbers to Help me orders new wheel assembly or info that might help me reassemble.  I know the watch isn’t worth the trouble or the cost of a replace,met  balance wheel but am thinking (scary) that it will be helpful to me to reassemble all parts.  YouTube always make things look so easy.

Any advice is always appreciated but no comments on my sanity please as I already know.

Wes

Link to comment
Share on other sites
watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi Wes and welcome to the forum   Not the right watch to start on I am afraid,  I should lay hold of some simple/robust Russian movements, available at low cost therefore any damage done is low value, the chinese Tourbillion  is not easy as you found out and also parts/tech information is scarce. Another good starter is the Seiko range, plenty of spares and plenty of tech information. Put it down to experience and move on        all the best

  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
3 hours ago, WES1946 said:

I grabbed an older Chinese CTI tourbillion and proceeded with my task at hand.

I'm pretty sure that you ain't got a "Chinese tourbillon" because that (ST8240) reatails for $1,700, still a fraction compared to Swiss. You mov't is some common "open hart blance" or other flashy contraption. However it was  good to start with because being cheap or free, it taught you that parts for Chinese are not available, and things are not as easy as they seem. Good luck with your future endeavours!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • GuyMontag
      What tools does ebay have to offer this week.

      By GuyMontag · Posted

      I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
×
×
  • Create New...