Jump to content

Miyota Escape Wheel

DrG

By DrG
in Watch Repairs Help & Advice

 Share

Recommended Posts

DrG Watch Enthusiast

DrG

Posted
Posted

Hi Everyone! 

I have been practicing watch servicing these past months. So far I have successfully serviced a ST36 (ETA6497 clone), thanks to Mark's watch repair course which is awesome! I have also tried to service a NH25A, and messed up the hairpsring (replacement on the way), and a Miyota 8215. Everything was going well with the 8215 until I reassembled the train bridge and noticed that the escape wheel wobbles when I turn the wheels. My guess is that I accidentally broke off the upper pivot during cleaning. I was looking for a replacement escape wheel and found it at Cousin's, but they are out of stock. Anyone know any other place I could get one? Thanks. 

PS: Trying to keep a positive attitude after messing up two movements, but practice makes perfect. :)  

  • Like 1
Link to comment
Share on other sites
CaptCalvin WRT Addict

CaptCalvin

Posted
Posted

8215 isnt the easiest to put back together as there are too many pivots to line up. Takes a lot of patience. Also did you remember to release the power before disassembly? That's how I snapped the escape wheel pivot on one of mine. The click isnt the easiest to find. Pretty easy to overlook.

Link to comment
Share on other sites
DrG Watch Enthusiast

DrG

Posted
  • Author
Posted
1 minute ago, CaptCalvin said:

8215 isnt the easiest to put back together as there are too many pivots to line up. Takes a lot of patience. Also did you remember to release the power before disassembly? That's how I snapped the escape wheel pivot on one of mine. The click isnt the easiest to find. Pretty easy to overlook.

Hi! Thanks for the reply. I did release the power, but I think the pivot snapped during disassembly cause I knocked the escape wheel with the tweezers. :( 

Link to comment
Share on other sites
DrG Watch Enthusiast

DrG

Posted
  • Author
Posted
9 hours ago, watchweasol said:

Depending on your location,  Esslingers,   Jules borel,   Timesavers (USA)      A.G.Thomas, welwynwatchparts.co.uk,      obsoletewatchandclockparts.com in the UK.  a few to have a look at

Thank you! 

Link to comment
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HectorLooi
      Without Our Forum

      By HectorLooi · Posted

      Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • GuyMontag
      What tools does ebay have to offer this week.

      By GuyMontag · Posted

      I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
×
×
  • Create New...