Jump to content

Recommended Posts

I remember my great aunt had one of these from the co-operative insurance well into the 1970's the insurance man would collect the money every quarter and log the amount in a payment book I also remember my grandma had a television that ran off 10 pence pieces to cover the cost of rental it would always go off half way through a program and every one would scramble around there pockets for 10p, the joys of life before direct debit:D.

  • Like 1
  • Haha 1
Link to comment
Share on other sites

59 minutes ago, oldhippy said:

A florin is a two shilling coin for those that are too young to remember. 

Or to the initiated a two bob bit;)220px-1932_George_V_Florin_(reverse).JPG

Ones as old as this Victorian one were still in circulation in the 1960's....

170px-GREAT_BRITAIN,_VICTORIA_1899_-FLOR

The last florin was minted in 1970, replaced by the Ten New Pence coin...s-l1600.jpg

Edited by JohnD
Link to comment
Share on other sites

2 minutes ago, luiazazrambo said:

I cant wait to get my florins. I really need to save some time because i am so behind with my many projects. :D I don't know what its secrets are, must be similar to "back to the future" stuff. Maybe if i take it apart....

Someone explained to me a few years ago that collecting watches was a subliminal attempt to collect time......now in my seventies I'm beginning to understand the concept.....

Link to comment
Share on other sites

Hi *,

The main spring is broken and someone tried to fix it by wrapping sewing thread around it? Is that a common method to fix mainsprings?

I removed  the other half of mainspring, but how do i remove the arbor now to be able to remove the rest of the broken spring and replace it? I can see marks on the arbor do I have to grab it somehow?

Or should I remove the ratchet wheel? Its pretty tight.

Thanks in advance,

Br, Lui

IMG_20200601_121053.thumb.jpg.7867bf04d042bbbd93525f46c655dde9.jpgIMG_20200601_121036.thumb.jpg.e36c0ebb73998b40d2a8fe163239ca52.jpg

Edited by luiazazrambo
Link to comment
Share on other sites

6 minutes ago, luiazazrambo said:

Is that a common method to fix mainsprings?

I would go so far as say its a very uncommon method, I've certainly never seen or heard of anyone doing that before.

The end should just have a hook on the arbour and a hole in the spring so you should be able to remove it without dismantling any further.

Likely the thread is just making that hard for you to see.

Link to comment
Share on other sites

 

I managed to figure it out. What pliers are the best to grab arbors without damaging them? I use sheet of papers trying to protect them. Pliers without teeth? Plus protection? I need to source a mainspring now and I cant find my bag of springs....

IMG_20200601_123637.jpg

Link to comment
Share on other sites

Use leather to protect the arbour when using pliers, seeing its brass you could have also gently heated it the expansion would have been enough to make it  very easy to remove.

  • Thanks 1
Link to comment
Share on other sites

The main spring just hooks over the post. Its the one nearest to the wheel with the arbor, so when it winds the end that hooks over the post is protected from slipping off due to the mainspring being close to it.  

Link to comment
Share on other sites

  • 1 month later...
On 6/1/2020 at 7:18 AM, luiazazrambo said:

The main spring is broken and someone tried to fix it by wrapping sewing thread around it?

Sewing thread, orphaned earrings, long dead mice; you never know what you might find in a used clock.

Link to comment
Share on other sites

Quote

This thing all things devours: Birds, beasts, trees, flowers; Gnaws iron, bites steel; Grinds hard stones to meal; Slays king, ruins town, And beats high mountain down.

I guess that qualifies quite nicely for @jdm 's thread on "Strange things inside a watch", and indeed in every watch and clock, although you could argue that it is not only in the watch, but indeed is the very essence of the watch.

  • Like 1
Link to comment
Share on other sites

12 hours ago, luiazazrambo said:

Or my favorite lifeshortener hobby, hairspring bending? 

I tend to think of it more as an act of intense concentration. A bit of engineering Zen. Or possibly a test of character, how long can you resist the urge to put the spring out of its misery with a large hammer :judge:

Link to comment
Share on other sites

3 hours ago, AndyHull said:

I tend to think of it more as an act of intense concentration. A bit of engineering Zen. Or possibly a test of character, how long can you resist the urge to put the spring out of its misery with a large hammer :judge:

I blame you for this, it says: Made in Scotland :D

Link to comment
Share on other sites

  • 2 weeks later...

The best I could do with the hairspring, not perfect, but after so many defeat I call it a draw:

IMG_20200719_230021.thumb.jpg.03fe5b272010806ced4b8c56e62c2f08.jpg

IMG_20200719_230007.thumb.jpg.e63303e0983a4b83391fe702f005ca58.jpg

The place where this wonderful piece of beauty was made, the person who operated the hammer did not have his morning haggis so M and S are missing:

IMG_20200719_231049.thumb.jpg.15328a78219fbe521d555490464d6f52.jpg

The movement together:

IMG_20200720_012650.thumb.jpg.c84b88421743849642ea52d8b3da8775.jpg

IMG_20200720_012503.thumb.jpg.b1c29832ad2d4579d5a026a9b848855a.jpg

I had no faith - plus a was lazy and did other important things as playing computer games -, that's why it was sitting on my bench and I did not touch it for a week or so, and i don't know if it is in beat, but it actually works!

 
  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I voted leave too, my reasoning was the the EU is undemocratic, no elected officials. I don't regret it but I  am sad that both sides acted like petulant toddlers.  Shameful.  I'm not on other forums but if I was and left this site, would you shun me? Of course not, we aren't petulant toddlers.  
    • This is a type of tool that may be suitable to remove the bezel - though note that I'm pretty sure the watch should be face down - not face up, as in some of the photos of these tools on amazon & ebay! If you try one one of those, put the movement screws back in first to avoid accidents. https://www.amazon.co.uk/Removal-Professional-Remover-Watchmaker-Diameter/dp/B09XCH4QVN?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=A296NCMMFVXSDN&th=1  
    • Hi, I’m constantly asking my wife to help me with removing the stem in order to complete casing. To expand, this is not a challenge for me when the setting lever is secured by a screw (older calibers). However when the setting lever is attached to a spring loaded setting lever axel, like on more modern calibers, I simply don’t see how to apply enough pressure on the button to get the stem out short of putting the movement face down with the dial and hands attached, which I’m loath to do in order to avoid damaging the dial/hands? what technique should I be using? thanks  
    • Many thanks for your advice (being borne in mind at present) & offer Dell. When I was given the clock the plastic anchor was loose on the arbour (it had split at the 'hole') &, after repairing this, I have been trying to determine whether the spindle (pin) should be perpendicular when the pallet is sitting on a flat surface; or whether, when installed, its L-R extremes (or alternatively its tick & tock points) should lie at equal angles from the vertical when moved with spring absent. I can get the clock to run but in every such configuration the top block has to be turned anti-clockwise (from above) by quite a bit in order to be 'in beat' & it always runs fast (despite the pendulum being set to as slow as possible). This makes me wonder if there is any particular feature of/fault in a torsion spring clock which determines which turn direction (if any) is necessary to get it 'in beat'; & whether there would be a different set of settings that would get it running nearer to time at somewhere around the mid timing/inertia position which would then allow tweaking of the fast/slow setting.
    • Now this has happened I bet China or India just to name two will start to produce none genuine parts.  I did. But idiot Boris Johnson failed miserably in his negotiations. The E U stitched up the UK like a kipper. Nigel Farage  offered his help but big head Boris declined. So this is why we are in this mess all because Johnson wasn't clever enough.  
×
×
  • Create New...