Jump to content

Hamilton GMT Hands Changing


Recommended Posts

I am having a problem clearly seeing the time on my Hamilton Jazzmaster Traveler 2, as the hand color is not at all in contrast with the face of the watch. Where can I source the proper hands and would there be an issue re-handing this watch.3746b37249d051c2b07404ec69423a0f.png695c89489da8a83e4b45d3ac1fbd8e4b.png

 

 

Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites

The watch is based on an ETA 2893-2 movement -- I have that watch, too. There are plenty of handsets for that movement on eBay for $15 ~ $25, but I'd have to agree with oldhippy. A fine brush and small jar of enamel paint from the local hobby shop (assuming one is open, now) is a $3 investment for exactly what you want.

Link to comment
Share on other sites

The watch is based on an ETA 2893-2 movement -- I have that watch, too. There are plenty of handsets for that movement on eBay for $15 ~ $25, but I'd have to agree with oldhippy. A fine brush and small jar of enamel paint from the local hobby shop (assuming one is open, now) is a $3 investment for exactly what you want.

But no lume


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

Yes ithink you are right as a contrast to the stainless steel a nice dark blue would be perfect.  The good thing id if you dont like it you can always clean it off.  There used to be a chemical used for blueing gun barrels that would make a nice dark metalic blue.

Link to comment
Share on other sites

1 hour ago, jdrichard said:


But no lume


Sent from my iPhone using Tapatalk Pro

It doesn't have any now, and the lume on that watch is pretty weak to begin with. In any case, the problem I can see is the hole for the GMT hand is 1.8 mm and it's current length is around 8 mm. Most GMT hands with a 1.8 mm hole are 13 mm and up. The GMT Jazzmaster has that rotating chapter ring that would start interfering with the hands at about 14 mm. 

This is my take on what that kind of mod might look like.

 

If you're okay with that, it's a $4 purchase. https://www.esslinger.com/alarm-calendar-gmt-and-24-hour-watch-movement-hands/

hamilton-mod.jpg

Link to comment
Share on other sites

luminox.jpg.37a39ab2a8ec329febcb4845b96b5bce.jpg

9 hours ago, jdrichard said:


I will screw that up for sure


Sent from my iPhone using Tapatalk Pro

I agree with Old Hippie.  I have an old Luminox that I wore when I was in the field (electrician).  The only metal is the crown and clasp.  I took a short length of #12AWG wire, which is made up of many finer strands, and curled the wire to create a base/pedestal, stripped off about 1/2" of insulation, and separated the strands into, sort-of the spokes of a half-opened umbrella, sort of V shaped.  I placed each hand on a strand, manipulated until I had the hands with the visible faces upright and horizontal, placed on a piece of large newspaper, and hit the gold hands with black spraypaint with very light, quick swipes.  Repeated until the hands were colored, and voila.  Didn't even have to broach the holes.  A look at the watch now, you'd never know the hands didn't come black. 

 

Don't see why you couldn't do the same.  

Edited by SparkyLB
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...