Jump to content

Lapping setup

Narcissus
 Share

Recommended Posts

Narcissus Member

Narcissus

Posted
Posted

I’ve always been really impressed by the lapping machines that are used to achieve flat faces and crisp on cases. Although I don’t do enough case refinishing to warrant the price of a machine, I though maybe I could achieve a similar result with something home built. The impetus to try came when I bought an Omega Chronostop. The case came with a sunburst case finish that was long gone and would require precise brushing.

 

b16d832fea794475f7f6cf471a810137.jpg

 

I figured I could replicate the multi-axis adjustment by using a telescope head. Found one on eBay for $125. Then added a 3 jaw Chuck for $50. My only issue was that I needed to adapt the two together. Because the stress won’t be so high I figured I could just 3D print some adapters and it worked perfectly! The great thing about the resin printer is that the resolution allowed me to actually print the threading!

 

fe21126fad465174b6360150762ebb5e.jpg

 

9869b7c960c464091c188749e99f6cf9.jpg

 

Because the case is a top loader, there was no good way to hold it properly so I printed an adapter to screw on the back.

 

479436545e9dc105891b3f9d547fb9e5.jpg

 

 

All ready to go:

 

fea3e97456b07bdee6da31e0ab1301f3.jpg

 

I am really happy with the results! The case has some dings that I wish I could laser weld but alas I can’t built one of those on the cheap. Lol.

 

My next step is to find a way to fasten everything down so I get more consistent engagement with the sander and recreate the angles consistently between checking my work.

 

7e40ee64a1e3182417c598126d013c95.jpg

 

 

ebd90dc1f0f7cb13cde9628e2b7a4a27.jpg

 

 

- Craig

  • Like 8
  • Thanks 2
Link to comment
Share on other sites
tobich New Member

tobich

Posted
Posted




I’ve always been really impressed by the lapping machines that are used to achieve flat faces and crisp on cases. Although I don’t do enough case refinishing to warrant the price of a machine, I though maybe I could achieve a similar result with something home built. The impetus to try came when I bought an Omega Chronostop. The case came with a sunburst case finish that was long gone and would require precise brushing.
 
b16d832fea794475f7f6cf471a810137.jpg&key=0abb212ddcde109e58b045ac9de19ed323f585c0187e7406af5b1d3d5db7c120
 
I figured I could replicate the multi-axis adjustment by using a telescope head. Found one on eBay for $125. Then added a 3 jaw Chuck for $50. My only issue was that I needed to adapt the two together. Because the stress won’t be so high I figured I could just 3D print some adapters and it worked perfectly! The great thing about the resin printer is that the resolution allowed me to actually print the threading!
 
fe21126fad465174b6360150762ebb5e.jpg&key=8f4a5b3a4c7e403b2727c1447afb18f33904d4d378dfac117d947b73a4aa6698
 
9869b7c960c464091c188749e99f6cf9.jpg&key=7902528277c923334fceff7f49cdfee944f3073dba74dfb975f02d4fed78152e
 
Because the case is a top loader, there was no good way to hold it properly so I printed an adapter to screw on the back.
 
479436545e9dc105891b3f9d547fb9e5.jpg&key=ae0ef434276a306b099ba20c4723643a40cac1d94eeb957352ea466f46333143
 
 
All ready to go:
 
fea3e97456b07bdee6da31e0ab1301f3.jpg&key=16fdd4d1159fcf7621e89700da43fdf840361d37fa623206fc6b59238498f364
 
I am really happy with the results! The case has some dings that I wish I could laser weld but alas I can’t built one of those on the cheap. Lol.
 
My next step is to find a way to fasten everything down so I get more consistent engagement with the sander and recreate the angles consistently between checking my work.
 
7e40ee64a1e3182417c598126d013c95.jpg&key=4ab541031e578979722c82977171d3e6eaae3b677b6a6295085c1c9364237d3e
 
 
ebd90dc1f0f7cb13cde9628e2b7a4a27.jpg&key=c6ccf1f93745c83fe6fbf1dd09bfcc32c34b728c7abbcabf2ec59a4b83d15a8f
 
 
- Craig


Nice Idea, can you please post the ebay link to the telescope head.
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
On 5/21/2020 at 2:57 AM, Narcissus said:

Then added a 3 jaw Chuck for $50. 

Nitpick, the market price for that type of chuck is a little more than $30 shipped. Alos interesting the below for $22, from the jaws casting marks it appears they are of a softer alloy, which is good to preserve the finishing of the work.

https://www.aliexpress.com/item/4000276565113.html

 

Link to comment
Share on other sites
  • 10 months later...
  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • joelcarvajal
      Gamblin Gamsol for cleaning?

      By joelcarvajal · Posted

      Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • nevenbekriev
      Main spring

      By nevenbekriev · Posted

      Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...