Jump to content

Can anyone help with info on this movement please?


eezy

Recommended Posts

This clock was liberated from the Belsen WW2 prison camp by my father. He was one of the first into Belsen and this clock was in the Commandant's quarters. There is a note somewhere, currently mislaid, from within the clock which contains Commandant Kramer's name. It sat on the mantelpiece at my Father's and worked everyday up until about 2006. I think it is an 8day movement.

The movement is signed Kohler and the case  has Berchtesgaden and Bergen on it. I cannot find any info at all onthe 'net.

clock5.JPG

clock6.JPG

clock7.JPG

  • Like 1
Link to comment
Share on other sites

I dont know what information you are looking for but your clock is by Christian Kohler GmbH they manufactured clock cases from 1913, they did not produce their own movements, and bought and cased these from other makers and signed them under their own name the movement in your clock is by a company called Friedrich Mauthe there may or may not be a Mauthe trademark stamped on the clock this would be a eagle with the letter F M S in a circle your clock would be pre war and date to the 1930's.

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

The movement is an 8 day bim bam sometimes called a ting tang  with rack striking. It has an anchor escapement. I can’t add any more info about the manufactured movement, wls1971 has said it all.

I have been to Berchtesgaden in the Bavarian Alps. That is where Hitler had his Eagles Nest retreat. I have also been inside many of the underground bunkers, fascinating place.

  • Thanks 1
Link to comment
Share on other sites

Gents, thank you both for the information, exactly what I wanted.

With the name Mauthe, I have been able to find a wealth of information. Not so with Kohler though, there seems to be very little about. Hence I have not been able to find a link to Berchtesgaden and can only assume that Kohler had a base there.

Thanks again

Link to comment
Share on other sites

  • 11 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...