Jump to content

Getting back into the game after 30+ years!

MechanicMike

By MechanicMike
in Introduce Yourself Here

 Share

Recommended Posts

MechanicMike Super WRT Addict

MechanicMike

Posted
Posted

Hi from the great white north of Minnesota and thanks for letting me join. Always fascinated Horology and have collected watches off and on all my life. Taking the next step and beginning to work on them. Wish me luck...I'll need it!

Mike

Link to comment
Share on other sites
MechanicMike Super WRT Addict

MechanicMike

Posted
  • Author
Posted

my workstation. Just started throwing it together. Being it's my first one and I really have no desk or stand, I just started using stuff around the house. Two stacked old closet doors for my table, an old cork board and a piece of green hobby foam glued together, an old mag lamp from the garage, and the wife came up with the plastic bins she had laying around. Now it's a fat bill from Ofrei.com for some badly needed bench tools. I'm an old tool and die machinist/mechanic and I'd give right arm for a mill and a lathe cuz I'd make the tooling myself!

15866493411245846298111328114183.jpg

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Razz
      404 Club

      By Razz · Posted

      Not SS but very slight wear on the underside edges have a little brass showing under magnification. New crystal arrived £3 with tax. Nice champaign dial color.
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      I also just realized I had that tech bulletin saved...but in French for some reason 🙂 No, I don't speak French. 2172_Bulova 11AOAC 11AOACD 11AOACB.pdf While parts are drying I'm on the hunt for a replacement crystal. I can measure the opening and get a generic one, but it'd be nice to find out what the original looked like first. Of course, case code 3093 does not appear in any of my reference materials. JulesBorel lists a C3093 case code, and shows Bulova part # 1222-5. Does anyone have information on this guy? I found a thread here talking about how the -5 is the height of the crystal, but that's as far as I've gotten. I also found one site that claims to have it in stock, but before I risk my $20 I'd like to confirm it's the right part.  
    • steve1811uk
      Oversized stem

      By steve1811uk · Posted

      Thanks for the replies. I did the job today and found that the oversized stem fitted just perfectly into the worn mainplate without any adjustment. Original stem diameter was 1.24mm and the oversized was 1.40mm. I did have to make an adjustment to the setting lever though. The small pip that engages with the groove in the stem hub was slightly to wide. I made that a bit smaller with a fine file. Don't ask me why that was too big, it just was. All working very well now. No wobble and not pulling out. New crown fitted as good measure.
    • eccentric59
      Hello fellow watch enthusiasts!

      By eccentric59 · Posted

      Welcome to WRT. 
    • fnick
      Hello fellow watch enthusiasts!

      By fnick · Posted

      Hi Vandan. Hi from a fellow newbie! Marshall has got a lot to answer for hasn't he! 😄. I also got hooked to this hobby after watching his videos.  Good luck with your journey to service your Grandfather's watch.   Nick 
×
×
  • Create New...