Jump to content

new member


Recommended Posts

Hello,

 

Just writing my first post.. I've occasionally serviced and repaired watches on and off for probably the last 15 years - only my own, mostly pocket watches. In more recent times I've decided to make my setup and approach more professional (such as switching from AG Thomas oil to Moebius, and hoping - prior to the current months of lock-down and financial riskiness - to take some of the BHI week-long courses to gain some official training beyond old books). A couple of months ago I made a new hook for a fusee chain.

 

Jonathan

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Yes, but the idea was that the OP wanted to be able to measure the diameter of the jewel holes in his collection of unordered jewels. Also, depending on the type of micrometre used one has to be careful not to dent the very small pivots (< 0.12mm) when pinching them in the micrometre. In my experience, the JKA Feintaster is safe to use also when measuring very small pivots. I don't understand your question, which I think was for me, no?
    • I didn't think there were any gauges under 0.1  .  I do like the old art deco tanks which are small sizes. My staff stash amounts to around half a mil. So i think I probably have that base covered. This 0.1mm set seems to be the most expensive, larger 100 piece set are about half the price. For around a 100 quid you can have sizes from 0.1 up to 4mm. Bugs me that they charge shipping for each seperate item so no combined shipping fee available.  Do you have the variable pin gauge as well ?
    • Yes, I understand that indeed.   Which is exactly what I am lacking, as I said. That's why the ring diameter matters to me.   That matches my anecdotal observation indeed. It could be the material or the modern backward curve that provides more power.   This is an interesting topic!  While these old oils were maybe thinner, their friction-reducing effect may still actually be lower than modern (even thicker oils), no? I man, some old, thin, organic oil may be less effective in reducing friction than a modern, thick HP1300 or so. What do you think?
    • Here are a couple of pictures of the tool that I mentioned in my first reply: Got the picture from here: https://klocksnack.se/threads/hobby-hörna-hemma-verktyg-tips-och-trix.163821/#post-4291582
    • Yep seen this tool before but never for sale. I bet there aren't many that aren't broken.
×
×
  • Create New...